[PATCH v4 1/5] of: Add NVIDIA Tegra Legacy Interrupt Controller binding

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

The Legacy Interrupt Controller found on NVIDIA Tegra SoCs is used by
the AVP coprocessor and can also serve as a backup for the ARM Cortex
CPU's local interrupt controller (GIC).

The LIC is subdivided into multiple identical units, each handling 32
possible interrupt sources.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
Changes in v3:
- bracket individual tuples in the "reg" property

 .../interrupt-controller/nvidia,tegra20-ictlr.txt     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
new file mode 100644
index 000000000000..1639389b7360
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
@@ -0,0 +1,19 @@
+NVIDIA Tegra Legacy Interrupt Controller
+
+The legacy interrupt controller is divided into units that serve 32 interrupts
+each. Tegra20 implements four units, whereas Tegra30 and later implement five.
+
+Required properties:
+- compatible: "nvidia,tegra<chip>-ictlr"
+- reg: Physical base address and length of the controller's registers. There
+  should be one entry for each unit.
+
+Example:
+
+	interrupt-controller at 60004000 {
+		compatible = "nvidia,tegra20-ictlr";
+		reg = <0x60004000 0x40>, /* primary controller */
+		      <0x60004100 0x40>, /* secondary controller */
+		      <0x60004200 0x40>, /* tertiary controller */
+		      <0x60004300 0x40>; /* quaternary controller */
+	};
-- 
2.0.4