[PATCH v3 2/3] rc: Introduce hix5hd2 IR transmitter driver

Zhangfei Gao zhangfei.gao at linaro.org
Thu Aug 28 08:16:16 PDT 2014


From: Guoxiong Yan <yanguoxiong at huawei.com>

IR transmitter driver for Hisilicon hix5hd2 soc

By default all protocols are disabled.
For example nec decoder can be enabled by either
1. ir-keytable -p nec
2. echo nec > /sys/class/rc/rc0/protocols
See see Documentation/ABI/testing/sysfs-class-rc

Signed-off-by: Guoxiong Yan <yanguoxiong at huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao at linaro.org>
---
 drivers/media/rc/Kconfig      |   11 ++
 drivers/media/rc/Makefile     |    1 +
 drivers/media/rc/ir-hix5hd2.c |  351 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 363 insertions(+)
 create mode 100644 drivers/media/rc/ir-hix5hd2.c

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 5e626af..64dc8bb 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -164,6 +164,17 @@ config IR_ENE
 	   To compile this driver as a module, choose M here: the
 	   module will be called ene_ir.
 
+config IR_HIX5HD2
+	tristate "Hisilicon hix5hd2 IR remote control"
+	depends on RC_CORE
+	help
+	 Say Y here if you want to use hisilicon remote control.
+	 The driver passes raw pulse and space information to the LIRC decoder.
+	 To compile this driver as a module, choose M here: the module will be
+	 called hisi_ir.
+
+	 If you're not sure, select N here
+
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 9f9843a1..0989f94 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_IR_XMP_DECODER) += ir-xmp-decoder.o
 
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
+obj-$(CONFIG_IR_HIX5HD2) += ir-hix5hd2.o
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
new file mode 100644
index 0000000..1839709
--- /dev/null
+++ b/drivers/media/rc/ir-hix5hd2.c
@@ -0,0 +1,351 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <media/rc-core.h>
+
+#define IR_ENABLE		0x00
+#define IR_CONFIG		0x04
+#define CNT_LEADS		0x08
+#define CNT_LEADE		0x0c
+#define CNT_SLEADE		0x10
+#define CNT0_B			0x14
+#define CNT1_B			0x18
+#define IR_BUSY			0x1c
+#define IR_DATAH		0x20
+#define IR_DATAL		0x24
+#define IR_INTM			0x28
+#define IR_INTS			0x2c
+#define IR_INTC			0x30
+#define IR_START		0x34
+
+/* interrupt mask */
+#define INTMS_SYMBRCV		(BIT(24) | BIT(8))
+#define INTMS_TIMEOUT		(BIT(25) | BIT(9))
+#define INTMS_OVERFLOW		(BIT(26) | BIT(10))
+#define INT_CLR_OVERFLOW	BIT(18)
+#define INT_CLR_TIMEOUT		BIT(17)
+#define INT_CLR_RCV		BIT(16)
+#define INT_CLR_RCVTIMEOUT	(BIT(16) | BIT(17))
+
+#define IR_CLK			0x48
+#define IR_CLK_ENABLE		BIT(4)
+#define IR_CLK_RESET		BIT(5)
+
+#define IR_CFG_WIDTH_MASK	0xffff
+#define IR_CFG_WIDTH_SHIFT	16
+#define IR_CFG_FORMAT_MASK	0x3
+#define IR_CFG_FORMAT_SHIFT	14
+#define IR_CFG_INT_LEVEL_MASK	0x3f
+#define IR_CFG_INT_LEVEL_SHIFT	8
+/* only support raw mode */
+#define IR_CFG_MODE_RAW		BIT(7)
+#define IR_CFG_FREQ_MASK	0x7f
+#define IR_CFG_FREQ_SHIFT	0
+#define IR_CFG_INT_THRESHOLD	1
+/* symbol start from low to high, symbol stream end at high*/
+#define IR_CFG_SYMBOL_FMT	0
+#define IR_CFG_SYMBOL_MAXWIDTH	0x3e80
+
+#define IR_HIX5HD2_NAME		"hix5hd2-ir"
+
+struct hix5hd2_ir_priv {
+	int			irq;
+	void			*base;
+	struct device		*dev;
+	struct rc_dev		*rdev;
+	struct regmap		*regmap;
+	struct clk		*clock;
+	const char		*map_name;
+	unsigned long		rate;
+};
+
+static void hix5hd2_ir_send_lirc_timeout(struct rc_dev *rdev)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+
+	ev.timeout = true;
+	ir_raw_event_store(rdev, &ev);
+}
+
+static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
+{
+	u32 symb_num, symb_val, symb_time;
+	u32 data_l, data_h;
+	u32 irq_sr, i;
+	struct hix5hd2_ir_priv *priv = data;
+
+	irq_sr = readl_relaxed(priv->base + IR_INTS);
+	if (irq_sr & INTMS_OVERFLOW) {
+		/*
+		 * we must read IR_DATAL first, then we can clean up
+		 * IR_INTS availably since logic would not clear
+		 * fifo when overflow, drv do the job
+		 */
+		ir_raw_event_reset(priv->rdev);
+		symb_num = readl_relaxed(priv->base + IR_DATAH);
+		for (i = 0; i < symb_num; i++)
+			readl_relaxed(priv->base + IR_DATAL);
+
+		writel_relaxed(INT_CLR_OVERFLOW, priv->base + IR_INTC);
+		dev_info(priv->dev, "overflow, level=%d\n",
+			 IR_CFG_INT_THRESHOLD);
+	}
+
+	if ((irq_sr & INTMS_SYMBRCV) || (irq_sr & INTMS_TIMEOUT)) {
+		DEFINE_IR_RAW_EVENT(ev);
+
+		symb_num = readl_relaxed(priv->base + IR_DATAH);
+		for (i = 0; i < symb_num; i++) {
+			symb_val = readl_relaxed(priv->base + IR_DATAL);
+			data_l = ((symb_val & 0xffff) * 10);
+			data_h =  ((symb_val >> 16) & 0xffff) * 10;
+			symb_time = (data_l + data_h) / 10;
+
+			ev.duration = US_TO_NS(data_l);
+			ev.pulse = true;
+			ir_raw_event_store(priv->rdev, &ev);
+
+			if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) {
+				ev.duration = US_TO_NS(data_h);
+				ev.pulse = false;
+				ir_raw_event_store(priv->rdev, &ev);
+			} else {
+				hix5hd2_ir_send_lirc_timeout(priv->rdev);
+			}
+		}
+
+		if (irq_sr & INTMS_SYMBRCV)
+			writel_relaxed(INT_CLR_RCV, priv->base + IR_INTC);
+		if (irq_sr & INTMS_TIMEOUT)
+			writel_relaxed(INT_CLR_TIMEOUT, priv->base + IR_INTC);
+	}
+
+	/* Empty software fifo */
+	ir_raw_event_handle(priv->rdev);
+	return IRQ_HANDLED;
+}
+
+static void hix5hd2_ir_enable(struct hix5hd2_ir_priv *dev, bool on)
+{
+	u32 val;
+
+	regmap_read(dev->regmap, IR_CLK, &val);
+	if (on) {
+		val &= ~IR_CLK_RESET;
+		val |= IR_CLK_ENABLE;
+	} else {
+		val &= ~IR_CLK_ENABLE;
+		val |= IR_CLK_RESET;
+	}
+	regmap_write(dev->regmap, IR_CLK, val);
+}
+
+static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv)
+{
+	int timeout = 10000;
+	u32 val, rate;
+
+	writel_relaxed(0x01, priv->base + IR_ENABLE);
+	while (readl_relaxed(priv->base + IR_BUSY)) {
+		if (timeout--) {
+			udelay(1);
+		} else {
+			dev_err(priv->dev, "IR_BUSY timeout\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	/* Now only support raw mode, with symbol start from low to high */
+	rate = DIV_ROUND_CLOSEST(priv->rate, 1000000);
+	val = IR_CFG_SYMBOL_MAXWIDTH & IR_CFG_WIDTH_MASK << IR_CFG_WIDTH_SHIFT;
+	val |= IR_CFG_SYMBOL_FMT & IR_CFG_FORMAT_MASK << IR_CFG_FORMAT_SHIFT;
+	val |= (IR_CFG_INT_THRESHOLD - 1) & IR_CFG_INT_LEVEL_MASK
+	       << IR_CFG_INT_LEVEL_SHIFT;
+	val |= IR_CFG_MODE_RAW;
+	val |= (rate - 1) & IR_CFG_FREQ_MASK << IR_CFG_FREQ_SHIFT;
+	writel_relaxed(val, priv->base + IR_CONFIG);
+
+	writel_relaxed(0x00, priv->base + IR_INTM);
+	/* write arbitrary value to start  */
+	writel_relaxed(0x01, priv->base + IR_START);
+	return 0;
+}
+
+static int hix5hd2_ir_open(struct rc_dev *rdev)
+{
+	struct hix5hd2_ir_priv *priv = rdev->priv;
+
+	hix5hd2_ir_enable(priv, true);
+	hix5hd2_ir_config(priv);
+	return 0;
+}
+
+static void hix5hd2_ir_close(struct rc_dev *rdev)
+{
+	struct hix5hd2_ir_priv *priv = rdev->priv;
+
+	hix5hd2_ir_enable(priv, false);
+}
+
+static struct of_device_id hix5hd2_ir_table[] = {
+	{ .compatible = "hisilicon,hix5hd2-ir", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
+
+static int hix5hd2_ir_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct rc_dev *rdev;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct hix5hd2_ir_priv *priv;
+	struct device_node *node = pdev->dev.of_node;
+
+	priv = devm_kzalloc(dev, sizeof(struct hix5hd2_ir_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = syscon_regmap_lookup_by_phandle(node,
+						       "hisilicon,power-syscon");
+	if (IS_ERR(priv->regmap)) {
+		dev_err(dev, "no power-reg\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0) {
+		dev_err(dev, "irq can not get\n");
+		return priv->irq;
+	}
+
+	if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
+			     IRQF_NO_SUSPEND, pdev->name, priv) < 0) {
+		dev_err(dev, "IRQ %d register failed\n", priv->irq);
+		return -EINVAL;
+	}
+
+	rdev = rc_allocate_device();
+	if (!rdev)
+		return -ENOMEM;
+
+	priv->clock = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clock)) {
+		dev_err(dev, "clock not found\n");
+		return PTR_ERR(priv->clock);
+	}
+	clk_prepare_enable(priv->clock);
+	priv->rate = clk_get_rate(priv->clock);
+
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protocols = RC_BIT_ALL;
+	rdev->priv = priv;
+	rdev->open = hix5hd2_ir_open;
+	rdev->close = hix5hd2_ir_close;
+	rdev->driver_name = IR_HIX5HD2_NAME;
+	priv->map_name = of_get_property(node, "linux,rc-map-name", NULL);
+	rdev->map_name = priv->map_name ?: RC_MAP_EMPTY;
+	rdev->input_name = IR_HIX5HD2_NAME;
+	rdev->input_phys = IR_HIX5HD2_NAME "/input0";
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = 0x0001;
+	rdev->input_id.product = 0x0001;
+	rdev->input_id.version = 0x0100;
+	rdev->rx_resolution = US_TO_NS(10);
+	rdev->timeout = US_TO_NS(IR_CFG_SYMBOL_MAXWIDTH * 10);
+
+	ret = rc_register_device(rdev);
+	if (ret < 0)
+		goto err;
+
+	priv->rdev = rdev;
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	/**
+	 * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW
+	 * lircd expects a long space first before a signal train to sync.
+	 */
+	hix5hd2_ir_send_lirc_timeout(rdev);
+	return ret;
+
+err:
+	clk_disable_unprepare(priv->clock);
+	rc_free_device(rdev);
+	dev_err(dev, "Unable to register device (%d)\n", ret);
+	return ret;
+}
+
+static int hix5hd2_ir_remove(struct platform_device *pdev)
+{
+	struct hix5hd2_ir_priv *priv = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(priv->clock);
+	rc_unregister_device(priv->rdev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int hix5hd2_ir_suspend(struct device *dev)
+{
+	struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clock);
+	hix5hd2_ir_enable(priv, false);
+
+	return 0;
+}
+
+static int hix5hd2_ir_resume(struct device *dev)
+{
+	struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
+
+	hix5hd2_ir_enable(priv, true);
+	clk_prepare_enable(priv->clock);
+
+	writel_relaxed(0x01, priv->base + IR_ENABLE);
+	writel_relaxed(0x00, priv->base + IR_INTM);
+	writel_relaxed(0xff, priv->base + IR_INTC);
+	writel_relaxed(0x01, priv->base + IR_START);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend,
+			 hix5hd2_ir_resume);
+
+static struct platform_driver hix5hd2_ir_driver = {
+	.driver = {
+		.name = IR_HIX5HD2_NAME,
+		.of_match_table = hix5hd2_ir_table,
+		.pm     = &hix5hd2_ir_pm_ops,
+	},
+	.probe = hix5hd2_ir_probe,
+	.remove = hix5hd2_ir_remove,
+};
+
+module_platform_driver(hix5hd2_ir_driver);
+
+MODULE_DESCRIPTION("RC Transceiver driver for hix5hd2 platforms");
+MODULE_AUTHOR("Guoxiong Yan <yanguoxiong at huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:hix5hd2-ir");
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list