[PATCH 1/2 V4] irqchip: gic: Add supports for ARM GICv2m MSI(-X)

[Suravee Suthikulpanit]

On 08/14/2014 12:55 PM, Mark Rutland wrote:
> On Wed, Aug 13, 2014 at 04:00:40PM +0100, suravee.suthikulpanit at amd.com wrote:
>> From: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
>>
>> ARM GICv2m specification extends GICv2 to support MSI(-X) with
>> a new set of register frame. This patch introduces support for
>> the non-secure GICv2m register frame. Currently, GICV2m is available
>> in certain version of GIC-400.
>>
>> The patch introduces a new property in ARM gic binding, the v2m subnode.
>> It is optional.
>>
>> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
>> Cc: Mark Rutland <Mark.Rutland at arm.com>
>> Cc: Marc Zyngier <Marc.Zyngier at arm.com>
>> Cc: Jason Cooper <jason at lakedaemon.net>
>> Cc: Catalin Marinas <Catalin.Marinas at arm.com>
>> Cc: Will Deacon <Will.Deacon at arm.com>
>> ---
>>   Documentation/devicetree/bindings/arm/gic.txt |  32 ++++
>>   drivers/irqchip/Kconfig                       |   7 +
>>   drivers/irqchip/Makefile                      |   1 +
>>   drivers/irqchip/irq-gic-v2m.c                 | 215 ++++++++++++++++++++++++++
>>   drivers/irqchip/irq-gic.c                     |  75 +++++----
>>   drivers/irqchip/irq-gic.h                     |  48 ++++++
>>   6 files changed, 348 insertions(+), 30 deletions(-)
>>   create mode 100644 drivers/irqchip/irq-gic-v2m.c
>>   create mode 100644 drivers/irqchip/irq-gic.h
>>
>> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
>> index 5573c08..8a64179 100644
>> --- a/Documentation/devicetree/bindings/arm/gic.txt
>> +++ b/Documentation/devicetree/bindings/arm/gic.txt
>> @@ -95,3 +95,35 @@ Example:
>>                        <0x2c006000 0x2000>;
>>                  interrupts = <1 9 0xf04>;
>>          };
>> +
>> +
>> +* GICv2m extension for MSI/MSI-x support (Optional)
>> +
>> +Certain revision of GIC-400 supports MSI/MSI-x via V2M register frame.
>> +This is enabled by specifying v2m sub-node.
>> +
>> +Required properties:
>> +
>> +- msi-controller : Identifies the node as an MSI controller.
>> +
>> +- reg : GICv2m MSI interface register base and size
>> +
>> +Example:
>> +
>> +       interrupt-controller at e1101000 {
>> +               compatible = "arm,gic-400";
>> +               #interrupt-cells = <3>;
>> +               #address-cells = <2>;
>> +               #size-cells = <2>;
>> +               interrupt-controller;
>> +               interrupts = <1 8 0xf04>;
>> +               ranges = <0 0 0 0xe1100000 0 0x100000>;
>> +               reg = <0x0 0xe1110000 0 0x01000>,
>> +                     <0x0 0xe112f000 0 0x02000>,
>> +                     <0x0 0xe1140000 0 0x10000>,
>> +                     <0x0 0xe1160000 0 0x10000>;
>> +               v2m {
>> +                       msi-controller;
>> +                       reg = <0x0 0x80000 0 0x1000>;
>> +               };
>> +       };
>
> [...]
>
>> @@ -1009,6 +1012,16 @@ gic_of_init(struct device_node *node, struct device_node *parent)
>>          if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
>>                  percpu_offset = 0;
>>
>> +       gic_data[gic_cnt].irq_chip = &gic_chip;
>> +
>> +       /* Currently, we only support one v2m subnode. */
>> +       child = of_get_child_by_name(node, "v2m");
>> +       if (child) {
>> +               ret = gicv2m_of_init(child, &gic_data[gic_cnt]);
>> +               if (ret)
>> +                       return ret;
>> +       }
>
> I can't see how you'd sanely expand this to multiple children, which was
> the main point of having a separate node for the M block.
>
> Give the M block a compatible string and look for children with that
> string.
>
> Thanks,
> Mark.
>
Good point. I can try that.

Thank,

Suravee