[PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables

[Andreas Färber]

Am 25.08.2014 14:10, schrieb Mikko Perttunen:
> On 25/08/14 13:55, Mikko Perttunen wrote:
>> On 25/08/14 13:32, Andreas Färber wrote:
>>> Am 22.08.2014 23:18, schrieb Stephen Warren:
>>>> From: Stephen Warren <swarren at nvidia.com>
>>>>
>>>> This pinmux tables currently omit any configuration for PCIe clk_req,
>>>> wake, and rst pins, which in turn causes intermittent failures in
>>>> U-Boot's PCIe support. Import an updated version of the pinmux tables
>>>> which rectifies this.
>>>>
>>>> (While I'm still hoping to remove the pinmux tables from DTs for
>>>> Tegra124+ devices, while they're still here, they may as well be
>>>> complete and correct).
>>>>
>>>> Signed-off-by: Stephen Warren <swarren at nvidia.com>
>>>> ---
>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35
>>>> +++++++++++++++++++++++++++++++
>>>>   1 file changed, 35 insertions(+)
>>>
>>> I've tested this patch on both -rc1 and yesterday's torvalds/linux.git
>>> with tegra_defconfig: Both with or without this patch I get empty lspci
>>> output.
>>>
>>> There doesn't seem to be a tegra/linux.git for-next branch based on -rc1
>>> yet - are patches from other subsystem trees needed to get the on-board
>>> Ethernet detected or maybe some config option?
>>
>> git://gitorious.org/thierryreding/linux.git staging/pci
>
> .. and apparently the device tree patches are in staging/tegra.

Thanks for the URLs. I tested yesterday's staging/master, but booting
from SD seemed broked, sdhci-tegra probe kept deferring. Is that a known
issue?

PCI bus was getting detected okay before that point though.

Regards,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg