[PATCH 0/8] Tegra124 EMC (external memory controller) support

[Stephen Warren]

On 07/11/2014 08:18 AM, Mikko Perttunen wrote:
> Hi everyone,
>
> this series adds support for the EMC (external memory controller) clock
> in the Tegra124 system-on-chip. The series has been tested on Jetson TK1.
>
> The first two patches remove the old "emc_mux" and "emc" clocks from the
> clock tree and the device tree bindings. This is, of course, not backwards
> compatible, but as these clocks have never been useful for anything
> (apart from maybe reading the boot rate of the EMC clock). If this is still
> not acceptable, the second patch can be dropped.
...

Mikko, this series had some comments, especially on the DT binding 
(patch 5/8) and how the MC/EMC drivers interact. Is there an updated 
version of the series? Or, is the series replaced by Tomeu Vizoso's work?