[PATCH v6 4/4] net: moxa: continue loop on skb allocation failure

[Jonas Jensen]

If netdev_alloc_skb_ip_align() fails, subsequent code will
try to dereference an invalid pointer.

Continue to next descriptor on error.

While we're at it,

1. eliminate the chance of an endless loop, replace the main
   loop with while(rx < budget)

2. use napi_complete() and remove the explicit napi_gro_flush()

Signed-off-by: Jonas Jensen <jonas.jensen at gmail.com>
---

Notes:
    Applies to next-20140825

 drivers/net/ethernet/moxa/moxart_ether.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c
index 983d019..2f12c88 100644
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -206,7 +206,7 @@ static int moxart_rx_poll(struct napi_struct *napi, int budget)
 	int rx_head = priv->rx_head;
 	int rx = 0;
 
-	while (1) {
+	while (rx < budget) {
 		desc = priv->rx_desc_base + (RX_REG_DESC_SIZE * rx_head);
 		desc0 = readl(desc + RX_REG_OFFSET_DESC0);
 
@@ -218,7 +218,7 @@ static int moxart_rx_poll(struct napi_struct *napi, int budget)
 			net_dbg_ratelimited("packet error\n");
 			priv->stats.rx_dropped++;
 			priv->stats.rx_errors++;
-			continue;
+			goto rx_next;
 		}
 
 		len = desc0 & RX_DESC0_FRAME_LEN_MASK;
@@ -235,6 +235,7 @@ static int moxart_rx_poll(struct napi_struct *napi, int budget)
 			net_dbg_ratelimited("netdev_alloc_skb_ip_align failed\n");
 			priv->stats.rx_dropped++;
 			priv->stats.rx_errors++;
+			goto rx_next;
 		}
 
 		memcpy(skb->data, priv->rx_buf[rx_head], len);
@@ -249,18 +250,15 @@ static int moxart_rx_poll(struct napi_struct *napi, int budget)
 		if (desc0 & RX_DESC0_MULTICAST)
 			priv->stats.multicast++;
 
+rx_next:
 		writel(RX_DESC0_DMA_OWN, desc + RX_REG_OFFSET_DESC0);
 
 		rx_head = RX_NEXT(rx_head);
 		priv->rx_head = rx_head;
-
-		if (rx >= budget)
-			break;
 	}
 
 	if (rx < budget) {
-		napi_gro_flush(napi, false);
-		__napi_complete(napi);
+		napi_complete(napi);
 	}
 
 	priv->reg_imr |= RPKT_FINISH_M;
-- 
1.8.2.1