[PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables

[Andreas Färber]

Hi Stephen,

Am 22.08.2014 23:18, schrieb Stephen Warren:
> From: Stephen Warren <swarren at nvidia.com>
> 
> This pinmux tables currently omit any configuration for PCIe clk_req,
> wake, and rst pins, which in turn causes intermittent failures in
> U-Boot's PCIe support. Import an updated version of the pinmux tables
> which rectifies this.
> 
> (While I'm still hoping to remove the pinmux tables from DTs for
> Tegra124+ devices, while they're still here, they may as well be
> complete and correct).
> 
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> ---
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35 +++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)

I've tested this patch on both -rc1 and yesterday's torvalds/linux.git
with tegra_defconfig: Both with or without this patch I get empty lspci
output.

There doesn't seem to be a tegra/linux.git for-next branch based on -rc1
yet - are patches from other subsystem trees needed to get the on-board
Ethernet detected or maybe some config option?

Or did you test PCIe via the on-board slot?

I used U-Boot v2014.07, in case it matters.

Thanks,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg