[PATCHv4 2/4] thermal: exynos: Add support for many TRIMINFO_CTRL registers
Bartlomiej Zolnierkiewicz
b.zolnierkie at samsung.com
Mon Aug 25 03:15:56 PDT 2014
Hi,
On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
> shift/mask bit operation to set RELOAD feature instead of static value.
>
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: Zhang Rui <rui.zhang at intel.com>
> Cc: Eduardo Valentin <edubezval at gmail.com>
> Cc: Amit Daniel Kachhap <amit.daniel at samsung.com>
> Reviewed-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
> ---
> drivers/thermal/samsung/exynos_thermal_common.h | 1 +
> drivers/thermal/samsung/exynos_tmu.c | 23 ++++++++++++++++++++---
> drivers/thermal/samsung/exynos_tmu.h | 9 +++++++--
> drivers/thermal/samsung/exynos_tmu_data.c | 5 ++++-
> drivers/thermal/samsung/exynos_tmu_data.h | 3 +++
> 5 files changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index 3eb2ed9..b211976 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -28,6 +28,7 @@
> #define MAX_TRIP_COUNT 8
> #define MAX_COOLING_DEVICE 4
> #define MAX_THRESHOLD_LEVS 5
> +#define MAX_TRIMINFO_CTRL_REG 2
>
> #define ACTIVE_INTERVAL 500
> #define IDLE_INTERVAL 10000
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index acbff14..7234f38 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> struct exynos_tmu_platform_data *pdata = data->pdata;
> const struct exynos_tmu_registers *reg = pdata->registers;
> - unsigned int status, trim_info = 0, con;
> + unsigned int status, trim_info = 0, con, ctrl;
> unsigned int rising_threshold = 0, falling_threshold = 0;
> int ret = 0, threshold_code, i, trigger_levs = 0;
>
> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> }
> }
>
> - if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
> - __raw_writel(1, data->base + reg->triminfo_ctrl);
> + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
> + if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
Please remove this check and MAX_TRIMINFO_CTRL_REG define.
We do not want such runtime checks for development time errors.
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + for (i = 0; i < reg->triminfo_ctrl_count; i++) {
> + if (pdata->triminfo_reload[i]) {
> + ctrl = readl(data->base +
> + reg->triminfo_ctrl[i]);
> + ctrl &= ~(reg->triminfo_reload_mask <<
> + reg->triminfo_reload_shift);
> + ctrl |= pdata->triminfo_reload[i] <<
> + reg->triminfo_reload_shift;
triminfo_reload_shift and triminfo_reload_mask variables have always
the same values when this code is run so there is no need for them.
They should be added only when needed instead of doing it now.
> + __raw_writel(ctrl, data->base +
> + reg->triminfo_ctrl[i]);
> + }
> + }
> + }
>
> if (pdata->cal_mode == HW_MODE)
> goto skip_calib_data;
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 1b4a644..d7674ad 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -85,8 +85,11 @@ enum soc_type {
> * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
> * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
> * @triminfo_ctrl: trim info controller register.
> + * @triminfo_ctrl_count: the number of trim info controller register.
> * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
> reg.
> + * @triminfo_reload_mask: mask of triminfo reload enable bit in triminfo_ctrl
> + reg.
> * @tmu_ctrl: TMU main controller register.
> * @test_mux_addr_shift: shift bits of test mux address.
> * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
> @@ -151,9 +154,10 @@ struct exynos_tmu_registers {
> u32 triminfo_25_shift;
> u32 triminfo_85_shift;
>
> - u32 triminfo_ctrl;
> - u32 triminfo_ctrl1;
> + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
> + u32 triminfo_ctrl_count;
> u32 triminfo_reload_shift;
> + u32 triminfo_reload_mask;
>
> u32 tmu_ctrl;
> u32 test_mux_addr_shift;
> @@ -295,6 +299,7 @@ struct exynos_tmu_platform_data {
> u8 second_point_trim;
> u8 default_temp_offset;
> u8 test_mux;
> + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
>
> enum calibration_type cal_type;
> enum calibration_mode cal_mode;
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index aa8e0de..754c638 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -184,8 +184,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
> .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
> .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
> - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
> + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
> + .triminfo_ctrl_count = 1,
> .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
> + .triminfo_reload_mask = EXYNOS_TRIMINFO_RELOAD_MASK,
> .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
> .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
> .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
> @@ -252,6 +254,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> .temp_level = 95, \
> }, \
> .freq_tab_count = 2, \
> + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
> .registers = &exynos4412_tmu_registers, \
> .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
> TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index 401bab7..87454f63 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -64,6 +64,9 @@
> #define EXYNOS_EMUL_CON 0x80
>
> #define EXYNOS_TRIMINFO_RELOAD_SHIFT 0
> +#define EXYNOS_TRIMINFO_RELOAD_MASK 0x1
> +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
> +#define EXYNOS_TRIMINFO_RELOAD_DISABLE 0
This define is never used please remove it.
> #define EXYNOS_TRIMINFO_25_SHIFT 0
> #define EXYNOS_TRIMINFO_85_SHIFT 8
> #define EXYNOS_TMU_RISE_INT_MASK 0x111
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
More information about the linux-arm-kernel
mailing list