[PATCH] watchdog: imx2_wdt: Remove seperate big endian handling

[Markus Pargmann]

3.18 will contain a patch that handles endianess within the regmap
framework. It does not need any parsing of DT properties within the
driver, so we can savely remove it here.
The required mainline patch is
	(regmap: add DT endianness binding support.)

Cc: Xiubo Li <Li.Xiubo at freescale.com>
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
Hi,

This is the topic branch with the patches which replace the functionality of
this code.
https://git.kernel.org/cgit/linux/kernel/git/broonie/regmap.git/log/?h=topic/dt-endian

Best regards,

Markus


 drivers/watchdog/imx2_wdt.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 68c3d379ffa8..9d4874f09948 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/timer.h>
@@ -191,12 +190,10 @@ static struct regmap_config imx2_wdt_regmap_config = {
 
 static int __init imx2_wdt_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct imx2_wdt_device *wdev;
 	struct watchdog_device *wdog;
 	struct resource *res;
 	void __iomem *base;
-	bool big_endian;
 	int ret;
 	u32 val;
 
@@ -204,10 +201,6 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	if (!wdev)
 		return -ENOMEM;
 
-	big_endian = of_property_read_bool(np, "big-endian");
-	if (big_endian)
-		imx2_wdt_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base))
-- 
2.1.0.rc1