[PATCH 09/11 v4] coresight: adding support for beagle and beagleXM
Marcin Jabrzyk
marcin.jabrzyk at gmail.com
Sun Aug 24 14:38:29 PDT 2014
Hi,
W dniu 20.08.2014 o 19:03, mathieu.poirier at linaro.org pisze:
> From: Mathieu Poirier <mathieu.poirier at linaro.org>
>
> Currently supporting ETM and ETB. Support for TPIU
> and SDTI are yet to be added.
Did you tried running the drivers on board or are there any special
preparation needed?
I've BeagleBoard-xM Rev. C applied your patches and enabled the
functions the in menuconfig.
But on dmesg I see that:
[ 0.685028] of_amba_device_create(): amba_device_add() failed (-19)
for /etb at 5401b000
[ 0.685119] of_amba_device_create(): amba_device_add() failed (-19)
for /etm at 54010000
There are no nodes according coresight in /sys/kernel/debug/ .
Best regards,
Marcin
>
> Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
> ---
> arch/arm/boot/dts/omap3-beagle-xm.dts | 28 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap3-beagle.dts | 28 ++++++++++++++++++++++++++++
> 2 files changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index 1becefc..eec73d8 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -145,6 +145,34 @@
> };
> };
> };
> +
> + etb at 5401b000 {
> + compatible = "arm,coresight-etb10", "arm,primecell";
> + reg = <0x5401b000 0x1000>;
> +
> + coresight-default-sink;
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm_out>;
> + };
> + };
> + };
> +
> + etm at 54010000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x54010000 0x1000>;
> +
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etm_out: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + };
> };
>
> &omap3_pmx_wkup {
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 3c3e6da..a151daf 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -140,6 +140,34 @@
> };
> };
> };
> +
> + etb at 540000000 {
> + compatible = "arm,coresight-etb10", "arm,primecell";
> + reg = <0x5401b000 0x1000>;
> +
> + coresight-default-sink;
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm_out>;
> + };
> + };
> + };
> +
> + etm at 54010000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x54010000 0x1000>;
> +
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etm_out: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + };
> };
>
> &omap3_pmx_wkup {
More information about the linux-arm-kernel
mailing list