[PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description

[Sergei Shtylyov]

On 08/21/2014 11:14 PM, Murphy, Dan wrote:

[...]

>>> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
>>> Adding dt binding for this part

>>> Signed-off-by: Dan Murphy <dmurphy at ti.com>
>>> ---
>>>    .../devicetree/bindings/input/ti,drv2667.txt       |   18 ++++++++++++++++++
>>>    1 file changed, 18 insertions(+)
>>>    create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt

>>> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
>>> new file mode 100644
>>> index 0000000..525216d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
>>> @@ -0,0 +1,18 @@
>>> +Texas Instruments - drv2667 Haptics driver
>>> +
>>> +The drv2667 uses serial control bus communicates through I2C protocols
>>> +
>>> +Required properties:
>>> +	- compatible - "ti,drv2667" - DRV2667
>>> +	- reg -  I2C slave address
>>> +	- vbat-supply - Required supply regulator
>>> +
>>> +Example:
>>> +
>>> +drv2667: drv2667 at 59 {

>>      The ePAPR standard [1] has something to say on this matter:

> What is this reference?  Did not know this existed so wanted to read up on it.

    Sorry, forgot to paste the link. :-<

[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf

WBR, Sergei