[RESEND PATCH v2 4/4] dt-bindings: add bindings for mediatek intpol

[Matthias Brugger]

2014-08-13 4:11 GMT+02:00 Joe.C <srv_yingjoe.chen at mediatek.com>:
> From: "Joe.C" <yingjoe.chen at mediatek.com>
>
> Add binding documentation for Mediatek SoC GIC interrupt polarity extension.
>
> Signed-off-by: Joe.C <yingjoe.chen at mediatek.com>
> ---
>  .../bindings/interrupt-controller/mediatek,intpol.txt    | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt

I think the place for the file should be in
Documentation/devicetree/bindings/arm/mediatek/mediatek,intpol.txt as
it is a interrupt-controller extension of the mediatek architecture.

>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt
> new file mode 100644
> index 0000000..16ea372
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt
> @@ -0,0 +1,16 @@
> +Mediatek 65xx/81xx GIC interrupt polarity extension
> +
> +Mediatek SOCs contain controllable inverter for each GIC SPI interrupt,
> +these can be used as GIC interrupt polarity extension.
> +
> +Required properties:
> +- compatible: Compatible property value should be "mediatek,mt6577-intpol"
> +
> +- reg: Physical base address of the int pol registers and length of memory
> +  mapped region.
> +
> +Example:
> +       intpol: intpol at 10200100 {
> +               compatible = "mediatek,mt6577-intpol";
> +               reg = <0x10200100 0x1c>;
> +       };
> --
> 1.8.1.1.dirty
>



-- 
motzblog.wordpress.com