[PATCH v2 08/15] arm/arm64: KVM: refactor MMIO accessors
Andre Przywara
andre.przywara at arm.com
Thu Aug 21 06:06:49 PDT 2014
The MMIO accessors for GICD_I[CS]ENABLER, GICD_I[CS]PENDR and
GICD_ICFGR behave very similiar in GICv3, although the way the
affected vCPU is determined differs.
Factor out a generic, backend-facing implementation and use small
wrappers in the current GICv2 emulation to ease code sharing later.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
virt/kvm/arm/vgic.c | 93 ++++++++++++++++++++++++++++-----------------------
1 file changed, 52 insertions(+), 41 deletions(-)
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 5e0bc24..e8f92b2 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -418,35 +418,54 @@ static bool handle_mmio_raz_wi(struct kvm_vcpu *vcpu,
return false;
}
-static bool handle_mmio_set_enable_reg(struct kvm_vcpu *vcpu,
- struct kvm_exit_mmio *mmio,
- phys_addr_t offset)
+static bool vgic_handle_enable_reg(struct kvm *kvm, struct kvm_exit_mmio *mmio,
+ phys_addr_t offset, int vcpu_id, int access)
{
- u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_enabled,
- vcpu->vcpu_id, offset);
- vgic_reg_access(mmio, reg, offset,
- ACCESS_READ_VALUE | ACCESS_WRITE_SETBIT);
+ u32 *reg;
+ int mode = ACCESS_READ_VALUE | access;
+ struct kvm_vcpu *target_vcpu = kvm_get_vcpu(kvm, vcpu_id);
+
+ reg = vgic_bitmap_get_reg(&kvm->arch.vgic.irq_enabled, vcpu_id, offset);
+ vgic_reg_access(mmio, reg, offset, mode);
if (mmio->is_write) {
- vgic_update_state(vcpu->kvm);
+ if (access & ACCESS_WRITE_CLEARBIT) {
+ if (offset < 4) /* Force SGI enabled */
+ *reg |= 0xffff;
+ vgic_retire_disabled_irqs(target_vcpu);
+ }
+ vgic_update_state(kvm);
return true;
}
return false;
}
+static bool handle_mmio_set_enable_reg(struct kvm_vcpu *vcpu,
+ struct kvm_exit_mmio *mmio,
+ phys_addr_t offset)
+{
+ return vgic_handle_enable_reg(vcpu->kvm, mmio, offset,
+ vcpu->vcpu_id, ACCESS_WRITE_SETBIT);
+}
+
static bool handle_mmio_clear_enable_reg(struct kvm_vcpu *vcpu,
struct kvm_exit_mmio *mmio,
phys_addr_t offset)
{
- u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_enabled,
- vcpu->vcpu_id, offset);
- vgic_reg_access(mmio, reg, offset,
- ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
+ return vgic_handle_enable_reg(vcpu->kvm, mmio, offset,
+ vcpu->vcpu_id, ACCESS_WRITE_CLEARBIT);
+}
+
+static bool vgic_handle_pending_reg(struct kvm *kvm, struct kvm_exit_mmio *mmio,
+ phys_addr_t offset, int vcpu_id, int access)
+{
+ u32 *reg;
+ int mode = ACCESS_READ_VALUE | access;
+
+ reg = vgic_bitmap_get_reg(&kvm->arch.vgic.irq_state, vcpu_id, offset);
+ vgic_reg_access(mmio, reg, offset, mode);
if (mmio->is_write) {
- if (offset < 4) /* Force SGI enabled */
- *reg |= 0xffff;
- vgic_retire_disabled_irqs(vcpu);
- vgic_update_state(vcpu->kvm);
+ vgic_update_state(kvm);
return true;
}
@@ -457,31 +476,16 @@ static bool handle_mmio_set_pending_reg(struct kvm_vcpu *vcpu,
struct kvm_exit_mmio *mmio,
phys_addr_t offset)
{
- u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state,
- vcpu->vcpu_id, offset);
- vgic_reg_access(mmio, reg, offset,
- ACCESS_READ_VALUE | ACCESS_WRITE_SETBIT);
- if (mmio->is_write) {
- vgic_update_state(vcpu->kvm);
- return true;
- }
-
- return false;
+ return vgic_handle_pending_reg(vcpu->kvm, mmio, offset,
+ vcpu->vcpu_id, ACCESS_WRITE_SETBIT);
}
static bool handle_mmio_clear_pending_reg(struct kvm_vcpu *vcpu,
struct kvm_exit_mmio *mmio,
phys_addr_t offset)
{
- u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state,
- vcpu->vcpu_id, offset);
- vgic_reg_access(mmio, reg, offset,
- ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
- if (mmio->is_write) {
- vgic_update_state(vcpu->kvm);
- return true;
- }
-
+ return vgic_handle_pending_reg(vcpu->kvm, mmio, offset,
+ vcpu->vcpu_id, ACCESS_WRITE_CLEARBIT);
return false;
}
@@ -607,14 +611,10 @@ static u16 vgic_cfg_compress(u32 val)
* LSB is always 0. As such, we only keep the upper bit, and use the
* two above functions to compress/expand the bits
*/
-static bool handle_mmio_cfg_reg(struct kvm_vcpu *vcpu,
- struct kvm_exit_mmio *mmio, phys_addr_t offset)
+static bool vgic_handle_cfg_reg(u32 *reg, struct kvm_exit_mmio *mmio,
+ phys_addr_t offset)
{
u32 val;
- u32 *reg;
-
- reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_cfg,
- vcpu->vcpu_id, offset >> 1);
if (offset & 4)
val = *reg >> 16;
@@ -643,6 +643,17 @@ static bool handle_mmio_cfg_reg(struct kvm_vcpu *vcpu,
return false;
}
+static bool handle_mmio_cfg_reg(struct kvm_vcpu *vcpu,
+ struct kvm_exit_mmio *mmio, phys_addr_t offset)
+{
+ u32 *reg;
+
+ reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_cfg,
+ vcpu->vcpu_id, offset >> 1);
+
+ return vgic_handle_cfg_reg(reg, mmio, offset);
+}
+
static bool handle_mmio_sgi_reg(struct kvm_vcpu *vcpu,
struct kvm_exit_mmio *mmio, phys_addr_t offset)
{
--
1.7.9.5
More information about the linux-arm-kernel
mailing list