[PATCH 1/5] phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp

[Gabriel Fernandez]

Thanks Kishon, i will fix.


BR

Gabriel.

On 20 August 2014 16:56, Kishon Vijay Abraham I <kishon at ti.com> wrote:
>
>
> On Wednesday 13 August 2014 09:04 PM, Gabriel FERNANDEZ wrote:
>> The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe
>> or USB3 devices.
>>
>> Signed-off-by: alexandre torgue <alexandre.torgue at st.com>
>> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro at st.com>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at linaro.org>
>> ---
>>  .../devicetree/bindings/phy/phy-miphy28lp.txt      | 126 +++++++++++++++++++++
>>  1 file changed, 126 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
>> new file mode 100644
>> index 0000000..6e57bd5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
>> @@ -0,0 +1,126 @@
>> +STMicroelectronics STi MIPHY28LP PHY binding
>> +============================================
>> +
>> +This binding describes a miphy device that is used to control PHY hardware
>> +for SATA, PCIe or USB3.
>> +
>> +Required properties (controller (parent) node):
>> +- compatible : Should be "st,miphy28lp-phy"
>> +- st,syscfg     : Should be a phandle of the system configuration register group
>
>                 ^^^
> I think here you used space and in the rest of places used tabs.