[PATCH 8/9] ARM: zynq: Remove hotplug.c

Soren Brinkmann soren.brinkmann at xilinx.com
Wed Aug 20 13:41:54 PDT 2014


The hotplug code contains only a single function, which is an SMP
function. Move that to platsmp.c where all other SMP runctions reside.
That allows removing hotplug.c and declaring the cpu_die function
static.

Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>
---
 arch/arm/mach-zynq/Makefile  |  1 -
 arch/arm/mach-zynq/common.h  |  3 +--
 arch/arm/mach-zynq/hotplug.c | 17 -----------------
 arch/arm/mach-zynq/platsmp.c | 18 ++++++++++++++++++
 4 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
index 820dff6e1eba..c85fb3f7d5cd 100644
--- a/arch/arm/mach-zynq/Makefile
+++ b/arch/arm/mach-zynq/Makefile
@@ -6,5 +6,4 @@
 obj-y				:= common.o slcr.o pm.o
 CFLAGS_REMOVE_hotplug.o		=-march=armv6k
 CFLAGS_hotplug.o 		=-Wa,-march=armv7-a -mcpu=cortex-a9
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index c0773e87e83c..e6bb12c50a23 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -39,8 +39,7 @@ extern struct smp_operations zynq_smp_ops __initdata;
 
 extern void __iomem *zynq_scu_base;
 
-/* Hotplug */
-extern void zynq_platform_cpu_die(unsigned int cpu);
+int zynq_pm_late_init(void);
 
 int zynq_pm_late_init(void);
 
diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c
index fe44a05677e2..b685c89f11e4 100644
--- a/arch/arm/mach-zynq/hotplug.c
+++ b/arch/arm/mach-zynq/hotplug.c
@@ -12,20 +12,3 @@
  */
 #include <asm/proc-fns.h>
 
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void zynq_platform_cpu_die(unsigned int cpu)
-{
-	zynq_slcr_cpu_state_write(cpu, true);
-
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;)
-		cpu_do_idle();
-}
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index f77f7ca4c45b..04e578718aa2 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -132,6 +132,24 @@ static int zynq_cpu_kill(unsigned cpu)
 	zynq_slcr_cpu_stop(cpu);
 	return 1;
 }
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+static void zynq_platform_cpu_die(unsigned int cpu)
+{
+	zynq_slcr_cpu_state_write(cpu, true);
+
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;)
+		cpu_do_idle();
+}
 #endif
 
 struct smp_operations zynq_smp_ops __initdata = {
-- 
2.0.1.1.gfbfc394




More information about the linux-arm-kernel mailing list