[PATCH v3 3/4] ARM: tegra: Add thermal trip points for Jetson TK1

[Stephen Warren]

On 08/06/2014 04:25 AM, Mikko Perttunen wrote:
> This adds critical trip points to the Jetson TK1 device tree.
> The device will do a controlled shutdown when either the CPU, GPU
> or MEM thermal zone reaches 101 degrees Celsius.

> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts

> +	thermal-zones {
> +		cpu {
> +			trips {
...
> +			};
> +		};

thermal.txt states that a cooling-maps sub-node is mandatory. However, 
it seems to be missing here. Is the DT binding documentation overly 
strict, or do we need to add such a node here?