[PATCH v8 7/9] arm: sa1100: Migrate DEBUG_LL macros to shared directory
Daniel Thompson
daniel.thompson at linaro.org
Tue Aug 19 07:48:33 PDT 2014
As part of the migration we copy a few definitions from the mach-sa1100
headers and replace the automatic serial port detectiion with explicit
configuration based on DEBUG_UART_PHYS/DEBUG_UART_VIRT.
The removal of the automatic configuration is similar to the way migration
was handled for OMAP2 (see 808b7e07464d...).
Signed-off-by: Daniel Thompson <daniel.thompson at linaro.org>
Cc: Russell King <linux at arm.linux.org.uk>
---
arch/arm/Kconfig.debug | 41 ++++++++++++++--
arch/arm/include/debug/sa1100.S | 37 +++++++++++++++
arch/arm/mach-sa1100/include/mach/debug-macro.S | 62 -------------------------
3 files changed, 75 insertions(+), 65 deletions(-)
create mode 100644 arch/arm/include/debug/sa1100.S
delete mode 100644 arch/arm/mach-sa1100/include/mach/debug-macro.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d71427e..227ae88 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -762,6 +762,30 @@ choice
their output to UART 2. The port must have been initialised
by the boot-loader before use.
+ config DEBUG_SA1100_UART1
+ depends on ARCH_SA1100
+ select DEBUG_SA1100_UART
+ bool "Kernel low-level debugging messages via SA1100 Ser1"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SA1100 based platforms.
+
+ config DEBUG_SA1100_UART2
+ depends on ARCH_SA1100
+ select DEBUG_SA1100_UART
+ bool "Kernel low-level debugging messages via SA1100 Ser2"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SA1100 based platforms.
+
+ config DEBUG_SA1100_UART3
+ depends on ARCH_SA1100
+ select DEBUG_SA1100_UART
+ bool "Kernel low-level debugging messages via SA1100 Ser3"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SA1100 based platforms.
+
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
@@ -1057,6 +1081,10 @@ config DEBUG_TEGRA_UART
bool
depends on ARCH_TEGRA
+config DEBUG_SA1100_UART
+ bool
+ depends on ARCH_SA1100
+
config DEBUG_STI_UART
bool
depends on ARCH_STI
@@ -1086,6 +1114,7 @@ config DEBUG_LL_INCLUDE
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
+ default "debug/sa1100.S" if DEBUG_SA1100_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/sti.S" if DEBUG_STI_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1105,7 +1134,7 @@ config DEBUG_UART_PL01X
ARCH_SPEAR13XX || \
ARCH_VERSATILE
-# Compatibility options for 8250
+#Compatibility options for 8250
config DEBUG_UART_8250
def_bool ARCH_DOVE || ARCH_EBSA110 || \
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
@@ -1151,6 +1180,9 @@ config DEBUG_UART_PHYS
default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
default 0x7c0003f8 if FOOTBRIDGE
+ default 0x80010000 if DEBUG_SA1100_UART1
+ default 0x80030000 if DEBUG_SA1100_UART2
+ default 0x80050000 if DEBUG_SA1100_UART3
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
default 0x80230000 if DEBUG_PICOXCELL_UART
@@ -1187,7 +1219,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
DEBUG_MSM_UART || DEBUG_NETX_UART || DEBUG_QCOM_UARTDM || \
- DEBUG_S3C24XX_UART
+ DEBUG_S3C24XX_UART || DEBUG_SA1100_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1215,6 +1247,9 @@ config DEBUG_UART_VIRT
DEBUG_S3C2410_UART2)
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
+ default 0xf8010000 if DEBUG_SA1100_UART1
+ default 0xf8030000 if DEBUG_SA1100_UART2
+ default 0xf8050000 if DEBUG_SA1100_UART3
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xfa71e000 if DEBUG_QCOM_UARTDM
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
@@ -1260,7 +1295,7 @@ config DEBUG_UART_VIRT
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
DEBUG_MSM_UART || DEBUG_NETX_UART || DEBUG_QCOM_UARTDM || \
- DEBUG_S3C24XX_UART
+ DEBUG_S3C24XX_UART || DEBUG_SA1100_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/sa1100.S b/arch/arm/include/debug/sa1100.S
new file mode 100644
index 0000000..6b5e1ce
--- /dev/null
+++ b/arch/arm/include/debug/sa1100.S
@@ -0,0 +1,37 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#define UTDR 0x14
+#define UTSR1 0x20
+#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
+#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UTDR]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TNF
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TBY
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
deleted file mode 100644
index 530772d..0000000
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ /dev/null
@@ -1,62 +0,0 @@
-/* arch/arm/mach-sa1100/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <mach/hardware.h>
-
- .macro addruart, rp, rv, tmp
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- moveq \rp, #0x80000000 @ physical base address
- movne \rp, #0xf8000000 @ virtual address
-
- @ We probe for the active serial port here, coherently with
- @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
- @ We assume r1 can be clobbered.
-
- @ see if Ser3 is active
- add \rp, \rp, #0x00050000
- ldr \rv, [\rp, #UTCR3]
- tst \rv, #UTCR3_TXE
-
- @ if Ser3 is inactive, then try Ser1
- addeq \rp, \rp, #(0x00010000 - 0x00050000)
- ldreq \rv, [\rp, #UTCR3]
- tsteq \rv, #UTCR3_TXE
-
- @ if Ser1 is inactive, then try Ser2
- addeq \rp, \rp, #(0x00030000 - 0x00010000)
- ldreq \rv, [\rp, #UTCR3]
- tsteq \rv, #UTCR3_TXE
-
- @ clear top bits, and generate both phys and virt addresses
- lsl \rp, \rp, #8
- lsr \rp, \rp, #8
- orr \rv, \rp, #0xf8000000 @ virtual
- orr \rp, \rp, #0x80000000 @ physical
-
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UTDR]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #UTSR1]
- tst \rd, #UTSR1_TNF
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #UTSR1]
- tst \rd, #UTSR1_TBY
- bne 1001b
- .endm
--
1.9.3
More information about the linux-arm-kernel
mailing list