[PATCH 2/3] ARM: clps711x: edb7211: Use new PWM driver for backlight
Alexander Shiyan
shc_work at mail.ru
Tue Aug 19 05:31:14 PDT 2014
Remove existing tricks for handling PWM and use CLPS711X PWM driver.
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/configs/clps711x_defconfig | 4 +++-
arch/arm/mach-clps711x/board-edb7211.c | 37 ++++++++++++++++++++--------------
2 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 0facf9d..fc105c9 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -68,8 +68,8 @@ CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CLPS711X=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -77,6 +77,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_CLPS711X=y
CONFIG_EXT2_FS=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index fdf54d4..f339797 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -14,8 +14,9 @@
#include <linux/types.h>
#include <linux/i2c-gpio.h>
#include <linux/interrupt.h>
-#include <linux/backlight.h>
#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
#include <linux/memblock.h>
#include <linux/mtd/physmap.h>
@@ -108,23 +109,23 @@ static struct plat_lcd_data edb7211_lcd_power_pdata = {
.set_power = edb7211_lcd_power_set,
};
-static void edb7211_lcd_backlight_set_intensity(int intensity)
-{
- gpio_set_value(EDB7211_LCDBL, !!intensity);
- clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON);
-}
+static struct pwm_lookup edb7211_pwm_lookup[] = {
+ PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
+ 0, PWM_POLARITY_NORMAL),
+};
-static struct generic_bl_info edb7211_lcd_backlight_pdata = {
- .name = "lcd-backlight.0",
- .default_intensity = 0x01,
- .max_intensity = 0x0f,
- .set_bl_intensity = edb7211_lcd_backlight_set_intensity,
+static struct platform_pwm_backlight_data pwm_bl_pdata = {
+ .dft_brightness = 0x01,
+ .max_brightness = 0x0f,
+ .enable_gpio = EDB7211_LCDBL,
};
+static struct resource clps711x_pwm_res =
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
+
static struct gpio edb7211_gpios[] __initconst = {
{ EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" },
{ EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" },
- { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" },
};
/* Reserve screen memory region at the start of main system memory. */
@@ -153,12 +154,18 @@ static void __init edb7211_init_late(void)
gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
platform_device_register(&edb7211_flash_pdev);
+
platform_device_register_data(NULL, "platform-lcd", 0,
&edb7211_lcd_power_pdata,
sizeof(edb7211_lcd_power_pdata));
- platform_device_register_data(NULL, "generic-bl", 0,
- &edb7211_lcd_backlight_pdata,
- sizeof(edb7211_lcd_backlight_pdata));
+
+ platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
+ &clps711x_pwm_res, 1);
+ pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
+
+ platform_device_register_data(&platform_bus, "pwm-backlight", 0,
+ &pwm_bl_pdata, sizeof(pwm_bl_pdata));
+
platform_device_register_simple("video-clps711x", 0, NULL, 0);
platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
ARRAY_SIZE(edb7211_cs8900_resource));
--
1.8.5.5
More information about the linux-arm-kernel
mailing list