[PATCH] thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250

[Chanwoo Choi]

This patch add support for TRIM_RELOAD feature at Exynos3250. The TMU of
Exynos3250 has two TRIMINFO_CON register.

Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
Cc: Zhang Rui <rui.zhang at intel.com>
Cc: Eduardo Valentin <edubezval at gmail.com>
---
 drivers/thermal/samsung/exynos_tmu.c      | 7 +++++--
 drivers/thermal/samsung/exynos_tmu.h      | 5 +++--
 drivers/thermal/samsung/exynos_tmu_data.c | 9 ++++++++-
 drivers/thermal/samsung/exynos_tmu_data.h | 7 +++++--
 4 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index acbff14..ed01606 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -164,8 +164,11 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		}
 	}
 
-	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
-		__raw_writel(1, data->base + reg->triminfo_ctrl);
+	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+		for (i = 0; i < pdata->triminfo_reload_count; i++)
+			__raw_writel(pdata->triminfo_reload[i],
+					data->base + reg->triminfo_ctrl[i]);
+	}
 
 	if (pdata->cal_mode == HW_MODE)
 		goto skip_calib_data;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 1b4a644..72cb54e 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -151,8 +151,7 @@ struct exynos_tmu_registers {
 	u32	triminfo_25_shift;
 	u32	triminfo_85_shift;
 
-	u32	triminfo_ctrl;
-	u32	triminfo_ctrl1;
+	u32	triminfo_ctrl[2];
 	u32	triminfo_reload_shift;
 
 	u32	tmu_ctrl;
@@ -295,6 +294,8 @@ struct exynos_tmu_platform_data {
 	u8 second_point_trim;
 	u8 default_temp_offset;
 	u8 test_mux;
+	u8 triminfo_reload[2];
+	u8 triminfo_reload_count;
 
 	enum calibration_type cal_type;
 	enum calibration_mode cal_mode;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index aa8e0de..25f9890 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -95,6 +95,8 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
 	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
 	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
 	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
+	.triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
 	.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
 	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
@@ -160,6 +162,9 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
 		.temp_level = 95, \
 	}, \
 	.freq_tab_count = 2, \
+	.triminfo_reload[0] = 0x1, \
+	.triminfo_reload[1] = 0x11, \
+	.triminfo_reload_count = 2, \
 	.registers = &exynos3250_tmu_registers, \
 	.features = (TMU_SUPPORT_EMULATION | \
 			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
@@ -184,7 +189,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
 	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
 	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
-	.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
+	.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
 	.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
 	.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
@@ -252,6 +257,8 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 		.temp_level = 95, \
 	}, \
 	.freq_tab_count = 2, \
+	.triminfo_reload[0] = 0x1, \
+	.triminfo_reload_count = 1, \
 	.registers = &exynos4412_tmu_registers, \
 	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
 			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index f0979e5..e0536c3 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -57,8 +57,11 @@
 #define EXYNOS4210_TMU_TRIG_LEVEL_MASK	0x1111
 #define EXYNOS4210_TMU_INTCLEAR_VAL	0x1111
 
-/* Exynos5250 and Exynos4412 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON	0x14
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1	0x10
+
+/* Exynos5250, Exynos4412 and Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2	0x14
 #define EXYNOS_THD_TEMP_RISE		0x50
 #define EXYNOS_THD_TEMP_FALL		0x54
 #define EXYNOS_EMUL_CON		0x80
-- 
1.8.0