[PATCH v3 14/15] ARM: tegra: Add entries for cpufreq on Tegra124

[Tuomas Tynkkynen]

From: Tuomas Tynkkynen <ttynkkynen at nvidia.com>

The Tegra124 cpufreq driver relies on certain clocks being present
in the /cpus/cpu at 0 node.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen at nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 8ff4332..17f2382 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -782,10 +782,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu at 0 {
+		cpu0: cpu at 0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
 		cpu at 1 {
-- 
1.8.1.5