[PATCH 7/8] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller
Brian Norris
computersforpeace at gmail.com
Mon Aug 18 18:52:37 PDT 2014
On Mon, Aug 18, 2014 at 11:31:58AM +0100, Lee Jones wrote:
...
> +/* Derive Hamming-FLEX timing register values from 'nand_sdr_timings' data */
> +static void flex_calc_timing_registers(const struct nand_sdr_timings *spec,
> + int tCLK, int relax,
> + uint32_t *ctl_timing,
> + uint32_t *wen_timing,
> + uint32_t *ren_timing)
> +{
> + int tMAX_HOLD;
> + int n_ctl_setup;
> + int n_ctl_hold;
> + int n_ctl_wb;
> +
> + int tMAX_WEN_OFF;
> + int n_wen_on;
> + int n_wen_off;
> +
> + int tMAX_REN_OFF;
> + int n_ren_on;
> + int n_ren_off;
> +
> + /*
> + * CTL_TIMING
> + */
> +
> + /* - SETUP */
> + n_ctl_setup = (PICO_TO_MILI(spec->tCLS_min - spec->tWP_min)
> + + tCLK - 1)/tCLK;
Can you add spaces around the '/'? It helps readability. (This is
repeated throughout.)
> + if (n_ctl_setup < 1)
> + n_ctl_setup = 1;
> + n_ctl_setup += relax;
It's been discussed that many drivers probably want a simplified version
of struct nand_sdr_timings where some of these computations are done
already. As we haven't developed such a simplification yet, I'm fine
taking your computations as-is. If nothing else, they serve as a
reference for a later simplification. (Just FYI.)
> +
> + /* - HOLD */
> + tMAX_HOLD = spec->tCLH_min;
> + if (spec->tCH_min > tMAX_HOLD)
> + tMAX_HOLD = spec->tCH_min;
> + if (spec->tALH_min > tMAX_HOLD)
> + tMAX_HOLD = spec->tALH_min;
> + if (spec->tDH_min > tMAX_HOLD)
> + tMAX_HOLD = spec->tDH_min;
> + n_ctl_hold = (PICO_TO_MILI(tMAX_HOLD) + tCLK - 1)/tCLK + relax;
> +
> + /* - CE_deassert_hold = 0 */
> +
> + /* - WE_high_to_RBn_low */
> + n_ctl_wb = (PICO_TO_MILI(spec->tWB_max) + tCLK - 1)/tCLK;
> +
> + *ctl_timing = ((n_ctl_setup & 0xff) |
> + (n_ctl_hold & 0xff) << 8 |
> + (n_ctl_wb & 0xff) << 24);
> +
> + /*
> + * WEN_TIMING
> + */
> +
> + /* - ON */
> + n_wen_on = (PICO_TO_MILI(spec->tWH_min) + tCLK - 1)/tCLK + relax;
> +
> + /* - OFF */
> + tMAX_WEN_OFF = spec->tWC_min - spec->tWH_min;
> + if (spec->tWP_min > tMAX_WEN_OFF)
> + tMAX_WEN_OFF = spec->tWP_min;
> + n_wen_off = (PICO_TO_MILI(tMAX_WEN_OFF) + tCLK - 1)/tCLK + relax;
> +
> + *wen_timing = ((n_wen_on & 0xff) |
> + (n_wen_off & 0xff) << 8);
> +
> + /*
> + * REN_TIMING
> + */
> +
> + /* - ON */
> + n_ren_on = (PICO_TO_MILI(spec->tREH_min) + tCLK - 1)/tCLK + relax;
> +
> + /* - OFF */
> + tMAX_REN_OFF = spec->tRC_min - spec->tREH_min;
> + if (spec->tRP_min > tMAX_REN_OFF)
> + tMAX_REN_OFF = spec->tRP_min;
> + if (spec->tREA_max > tMAX_REN_OFF)
> + tMAX_REN_OFF = spec->tREA_max;
> + n_ren_off = (PICO_TO_MILI(tMAX_REN_OFF) + tCLK - 1)/tCLK + 1 + relax;
> +
> + *ren_timing = ((n_ren_on & 0xff) |
> + (n_ren_off & 0xff) << 8);
> +}
> +
> +/* Derive BCH timing register values from 'nand_sdr_timings' data */
> +static void bch_calc_timing_registers(const struct nand_sdr_timings *spec,
> + int tCLK, int relax,
> + uint32_t *ctl_timing,
> + uint32_t *wen_timing,
> + uint32_t *ren_timing)
> +{
> + int tMAX_HOLD;
> + int n_ctl_setup;
> + int n_ctl_hold;
> + int n_ctl_wb;
> +
> + int n_wen_on;
> + int n_wen_off;
> + int wen_half_on;
> + int wen_half_off;
> +
> + int tMAX_REN_ON;
> + int tMAX_CS_DEASSERT;
> + int n_d_latch;
> + int n_telqv;
> + int n_ren_on;
> + int n_ren_off;
> +
> + /*
> + * CTL_TIMING
> + */
> +
> + /* - SETUP */
> + if (spec->tCLS_min > spec->tWP_min)
> + n_ctl_setup = (PICO_TO_MILI(spec->tCLS_min - spec->tWP_min)
> + + tCLK - 1)/tCLK;
> + else
> + n_ctl_setup = 0;
> + n_ctl_setup += relax;
> +
> + /* - HOLD */
> + tMAX_HOLD = spec->tCLH_min;
> + if (spec->tCH_min > tMAX_HOLD)
> + tMAX_HOLD = spec->tCH_min;
> + if (spec->tALH_min > tMAX_HOLD)
> + tMAX_HOLD = spec->tALH_min;
> + if (spec->tDH_min > tMAX_HOLD)
> + tMAX_HOLD = spec->tDH_min;
> + n_ctl_hold = (PICO_TO_MILI(tMAX_HOLD) + tCLK - 1)/tCLK + relax;
> + /* - CE_deassert_hold = 0 */
> +
> + /* - WE_high_to_RBn_low */
> + n_ctl_wb = (PICO_TO_MILI(spec->tWB_max) + tCLK - 1)/tCLK;
> +
> + *ctl_timing = ((n_ctl_setup & 0xff) |
> + (n_ctl_hold & 0xff) << 8 |
> + (n_ctl_wb & 0xff) << 24);
> +
> + /*
> + * WEN_TIMING
> + */
> +
> + /* - ON */
> + n_wen_on = (2 * PICO_TO_MILI(spec->tWH_min) + tCLK - 1)/tCLK;
> + wen_half_on = n_wen_on % 2;
> + n_wen_on /= 2;
> + n_wen_on += relax;
> +
> + /* - OFF */
> + n_wen_off = (2 * PICO_TO_MILI(spec->tWP_min) + tCLK - 1)/tCLK;
> + wen_half_off = n_wen_off % 2;
> + n_wen_off /= 2;
> + n_wen_off += relax;
> +
> + *wen_timing = ((n_wen_on & 0xff) |
> + (n_wen_off & 0xff) << 8 |
> + (wen_half_on << 16) |
> + (wen_half_off << 17));
> +
> + /*
> + * REN_TIMING
> + */
> +
> + /* - ON */
> + tMAX_REN_ON = spec->tRC_min - spec->tRP_min;
> + if (spec->tREH_min > tMAX_REN_ON)
> + tMAX_REN_ON = spec->tREH_min;
> +
> + n_ren_on = (2 * PICO_TO_MILI(tMAX_REN_ON) + tCLK - 1)/tCLK;
> + n_ren_on /= 2;
> + n_ren_on += relax;
> +
> + /* - OFF */
> + n_ren_off = (2 * PICO_TO_MILI(spec->tREA_max) + tCLK - 1)/tCLK;
> + n_ren_off /= 2;
> + n_ren_off += relax;
> +
> + /* - DATA_LATCH */
> + if (PICO_TO_MILI(spec->tREA_max) <=
> + (PICO_TO_MILI(spec->tRP_min) - (2 * tCLK)))
> + n_d_latch = 0;
> + else if (PICO_TO_MILI(spec->tREA_max) <=
> + (PICO_TO_MILI(spec->tRP_min) - tCLK))
> + n_d_latch = 1;
> + else if ((spec->tREA_max <= spec->tRP_min) &&
> + (PICO_TO_MILI(spec->tRHOH_min) >= 2 * tCLK))
> + n_d_latch = 2;
> + else
> + n_d_latch = 3;
> +
> + /* - TELQV */
> + tMAX_CS_DEASSERT = spec->tCOH_min;
> + if (spec->tCHZ_max > tMAX_CS_DEASSERT)
> + tMAX_CS_DEASSERT = spec->tCHZ_max;
> +
> + n_telqv = (PICO_TO_MILI(tMAX_CS_DEASSERT) + tCLK - 1)/tCLK;
> +
> + *ren_timing = ((n_ren_on & 0xff) |
> + (n_ren_off & 0xff) << 8 |
> + (n_d_latch & 0x3) << 16 |
> + (wen_half_on << 18) |
> + (wen_half_off << 19) |
> + (n_telqv & 0xff) << 24);
> +}
> +
[...]
> +static void *stm_bch_dt_get_ddata(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct stm_nand_bch_ddata *ddata;
> + int ecc_strength;
> + int ret;
> +
> + ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
> + if (!ddata)
> + return ERR_PTR(-ENOMEM);
> +
> + of_property_read_u32(np, "nand-ecc-strength", &ecc_strength);
of_get_nand_ecc_strength()
> + if (ecc_strength == 0)
> + ddata->bch_ecc_cfg = BCH_NO_ECC;
> + else if (ecc_strength == 18)
> + ddata->bch_ecc_cfg = BCH_18BIT_ECC;
> + else if (ecc_strength == 30)
> + ddata->bch_ecc_cfg = BCH_30BIT_ECC;
> + else
> + ddata->bch_ecc_cfg = BCH_ECC_AUTO;
> +
> + ret = stm_of_get_nand_banks(&pdev->dev, np, &ddata->bank);
> + if (ret < 0)
> + return ERR_PTR(ret);
> +
> + return ddata;
> +}
> +
[...]
That's all for now. Maybe I'll take a fresh look at this later.
Brian
More information about the linux-arm-kernel
mailing list