[PATCH RESEND v2 7/7] ARM: dts: vf610-twr: Add USB support

[Stefan Agner]

Add USB support for Freescale Vybrid tower. The USB hosts over-current
protection signal is not connected is not connected to the PHY's over-
current protection, hence we need to disable it.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 arch/arm/boot/dts/vf610-twr.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 11d7334..c709dc3 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -265,3 +265,13 @@
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
-- 
2.0.4