[PATCH 2/6] irqchip: Supply new driver for STi based devices
Jason Cooper
jason at lakedaemon.net
Mon Aug 18 05:32:08 PDT 2014
On Tue, Jul 29, 2014 at 03:05:40PM +0100, Lee Jones wrote:
> This driver is used to enable System Configuration Register controlled
> External, CTI (Core Sight), PMU (Performance Management), and PL310 L2
> Cache IRQs prior to use.
>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
> drivers/irqchip/Kconfig | 7 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-st.c | 206 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 214 insertions(+)
> create mode 100644 drivers/irqchip/irq-st.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index bbb746e..7252de9 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -91,3 +91,10 @@ config IRQ_CROSSBAR
> The primary irqchip invokes the crossbar's callback which inturn allocates
> a free irq and configures the IP. Thus the peripheral interrupts are
> routed to one of the free irqchip interrupt lines.
> +
> +config ST_IRQCHIP
> + bool
> + select REGMAP
> + select MFD_SYSCON
> + help
> + Enables SysCfg Controlled IRQs on STi based platforms.
Now that I have my head above water (a bit) wrt irqchip, I really don't
like the hot mess that this file has become...
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 62a13e5..f859c14 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -30,3 +30,4 @@ obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
> obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
> obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
> obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
> +obj-$(CONFIG_ST_IRQCHIP) += irq-st.o
> diff --git a/drivers/irqchip/irq-st.c b/drivers/irqchip/irq-st.c
> new file mode 100644
> index 0000000..f31126f
> --- /dev/null
> +++ b/drivers/irqchip/irq-st.c
> @@ -0,0 +1,206 @@
> +/*
> + * drivers/irqchip/irq-st.c
> + *
> + * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
> + *
> + * Author: Lee Jones <lee.jones at linaro.org>
> + *
> + * This is a re-write of Christophe Kerello's PMU driver.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq-st.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define STIH415_SYSCFG_642 0x0a8
> +#define STIH416_SYSCFG_7543 0x87c
> +#define STIH407_SYSCFG_5102 0x198
> +#define STID127_SYSCFG_734 0x088
> +
> +#define ST_A9_IRQ_MASK 0x001FFFFF
> +#define ST_A9_IRQ_MAX_CHANS 2
> +
> +#define ST_A9_IRQ_EN_CTI_0 BIT(0)
> +#define ST_A9_IRQ_EN_CTI_1 BIT(1)
> +#define ST_A9_IRQ_EN_PMU_0 BIT(2)
> +#define ST_A9_IRQ_EN_PMU_1 BIT(3)
> +#define ST_A9_IRQ_EN_pl310_L2 BIT(4)
PL310
> +#define ST_A9_IRQ_EN_EXT_0 BIT(5)
> +#define ST_A9_IRQ_EN_EXT_1 BIT(6)
> +#define ST_A9_IRQ_EN_EXT_2 BIT(7)
> +
> +#define ST_A9_FIQ_N_SEL(dev, chan) (dev << (8 + (chan * 3)))
> +#define ST_A9_IRQ_N_SEL(dev, chan) (dev << (14 + (chan * 3)))
> +#define ST_A9_EXTIRQ_INV_SEL(dev) (dev << 20)
> +
> +struct st_irq_syscfg {
> + struct regmap *regmap;
> + unsigned int syscfg;
> + unsigned int result;
result seems odd here. It sounds like you're storing a return value,
when in fact, it looks like you are using it to determine whether or not
to invert... Perhaps a different variable name here?
> + bool ext_inverted;
> +};
> +
> +static const struct of_device_id st_irq_syscfg_match[] = {
> + {
> + .compatible = "st,stih415-irq-syscfg",
> + .data = (void *)STIH415_SYSCFG_642,
> + },
> + {
> + .compatible = "st,stih416-irq-syscfg",
> + .data = (void *)STIH416_SYSCFG_7543,
> + },
> + {
> + .compatible = "st,stih407-irq-syscfg",
> + .data = (void *)STIH407_SYSCFG_5102,
> + },
> + {
> + .compatible = "st,stid127-irq-syscfg",
> + .data = (void *)STID127_SYSCFG_734,
> + },
> + {}
> +};
> +
> +static int st_irq_xlate(struct platform_device *pdev,
> + int device, int channel, bool irq)
> +{
> + struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev);
> +
> + /* Set the device enable bit. */
> + switch (device) {
> + case ST_IRQ_SYSCFG_EXT_0 :
> + ddata->result |= ST_A9_IRQ_EN_EXT_0;
> + break;
> + case ST_IRQ_SYSCFG_EXT_1 :
> + ddata->result |= ST_A9_IRQ_EN_EXT_1;
> + break;
> + case ST_IRQ_SYSCFG_EXT_2 :
> + ddata->result |= ST_A9_IRQ_EN_EXT_2;
> + break;
> + case ST_IRQ_SYSCFG_CTI_0 :
> + ddata->result |= ST_A9_IRQ_EN_CTI_0;
> + break;
> + case ST_IRQ_SYSCFG_CTI_1 :
> + ddata->result |= ST_A9_IRQ_EN_CTI_1;
> + break;
> + case ST_IRQ_SYSCFG_PMU_0 :
> + ddata->result |= ST_A9_IRQ_EN_PMU_0;
> + break;
> + case ST_IRQ_SYSCFG_PMU_1 :
> + ddata->result |= ST_A9_IRQ_EN_PMU_1;
> + break;
> + case ST_IRQ_SYSCFG_pl310_L2 :
> + ddata->result |= ST_A9_IRQ_EN_pl310_L2;
> + break;
> + case ST_IRQ_SYSCFG_DISABLED :
> + return 0;
> + default :
> + dev_err(&pdev->dev, "Unrecognised device %d\n", device);
dev_dbg
> + return -EINVAL;
> + }
> +
> + /* Select IRQ/FIQ channel for device. */
> + ddata->result |= irq ?
> + ST_A9_IRQ_N_SEL(device, channel) :
> + ST_A9_FIQ_N_SEL(device, channel);
> +
> + return 0;
> +}
> +
> +static int st_irq_syscfg_enable(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev);
> + int channels, ret, i;
> + u32 device, invert;
> +
> + channels = of_property_count_u32_elems(np, "st,irq-device");
> + if (channels != ST_A9_IRQ_MAX_CHANS) {
> + dev_err(&pdev->dev, "st,enable-irq-device must have 2 elems\n");
> + return -EINVAL;
> + }
> +
> + channels = of_property_count_u32_elems(np, "st,fiq-device");
> + if (channels != ST_A9_IRQ_MAX_CHANS) {
> + dev_err(&pdev->dev, "st,enable-fiq-device must have 2 elems\n");
> + return -EINVAL;
> + }
I would drop these two blocks,
> +
> + for (i = 0; i < channels; i++) {
then use ST_A9_IRQ_MAX_CHANS here
> + of_property_read_u32_index(np,"st,irq-device", i, &device);
and dev_dbg() if of_property_read_u32_index() returns an error
> +
> + ret = st_irq_xlate(pdev, device, i, true);
> + if (ret)
> + return ret;
> +
> + of_property_read_u32_index(np,"st,fiq-device", i, &device);
for both of these.
> +
> + ret = st_irq_xlate(pdev, device, i, false);
> + if (ret)
> + return ret;
> + }
> +
> + /* External IRQs may be inverted. */
> + of_property_read_u32(np, "st,invert-ext", &invert);
> + ddata->result |= ST_A9_EXTIRQ_INV_SEL(invert);
> +
> + return regmap_update_bits(ddata->regmap, ddata->syscfg,
> + ST_A9_IRQ_MASK, ddata->result);
> +}
> +
> +int st_irq_syscfg_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + const struct of_device_id *match;
> + struct st_irq_syscfg *ddata;
> +
> + match = of_match_device(st_irq_syscfg_match, &pdev->dev);
> + if (!np)
if (!match) ?
> + return -ENODEV;
> +
> + ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
> + if (!ddata)
> + return -ENOMEM;
> +
> + ddata->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> + if (IS_ERR(ddata->regmap)) {
> + dev_err(&pdev->dev, "syscfg phandle missing\n");
dev_dbg
> + return PTR_ERR(ddata->regmap);
> + }
> +
> + dev_set_drvdata(&pdev->dev, ddata);
> +
> + return st_irq_syscfg_enable(pdev);
> +}
> +
> +static int st_irq_syscfg_resume(struct device *dev)
> +{
> + struct st_irq_syscfg *ddata = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(ddata->regmap, ddata->syscfg,
> + ST_A9_IRQ_MASK, ddata->result);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(st_irq_syscfg_pm_ops, NULL, st_irq_syscfg_resume);
> +
> +static struct platform_driver st_irq_syscfg_driver = {
> + .driver = {
> + .name = "st_irq_syscfg",
> + .pm = &st_irq_syscfg_pm_ops,
> + .of_match_table = st_irq_syscfg_match,
> + },
> + .probe = st_irq_syscfg_probe,
> +};
> +
> +static int __init st_irq_syscfg_init(void)
> +{
> + return platform_driver_register(&st_irq_syscfg_driver);
> +}
> +core_initcall(st_irq_syscfg_init);
thx,
Jason.
More information about the linux-arm-kernel
mailing list