[PATCH 3/7] ARM: meson6: clocksource: add Meson6 timer support

[Matthias Brugger]

On 17/08/14 12:49, Carlo Caione wrote:
> Meson6 SoCs are equipped with 5 32-bit timers, called TIMER_A, TIMER_B,
> TIMER_C, TIMER_D and TIMER_E.
>
> The driver is providing clocksource support for the 32-bit counter using
> TIMER_E. Clockevents are also supported using TIMER_A.
>
> Signed-off-by: Carlo Caione <carlo at caione.org>
> ---
>   drivers/clocksource/Kconfig        |   3 +
>   drivers/clocksource/Makefile       |   1 +
>   drivers/clocksource/meson6_timer.c | 187 +++++++++++++++++++++++++++++++++++++
>   3 files changed, 191 insertions(+)
>   create mode 100644 drivers/clocksource/meson6_timer.c
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cfd6519..38029ca 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -30,6 +30,9 @@ config ARMADA_370_XP_TIMER
>   	bool
>   	select CLKSRC_OF
>
> +config MESON6_TIMER
> +	bool
> +
>   config ORION_TIMER
>   	select CLKSRC_OF
>   	select CLKSRC_MMIO
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 7fd9fd1..e4ae987 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
>   obj-$(CONFIG_ARCH_U300)		+= timer-u300.o
>   obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
>   obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
> +obj-$(CONFIG_MESON6_TIMER)	+= meson6_timer.o
>   obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
>   obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
>   obj-$(CONFIG_ARCH_NSPIRE)	+= zevio-timer.o
> diff --git a/drivers/clocksource/meson6_timer.c b/drivers/clocksource/meson6_timer.c
> new file mode 100644
> index 0000000..1ef1095
> --- /dev/null
> +++ b/drivers/clocksource/meson6_timer.c
> @@ -0,0 +1,187 @@
> +/*
> + * Amlogic Meson6 SoCs timer handling.
> + *
> + * Copyright (C) 2014 Carlo Caione
> + *
> + * Carlo Caione <carlo at caione.org>
> + *
> + * Based on code from Amlogic, Inc
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqreturn.h>
> +#include <linux/sched_clock.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +
> +enum {
> +	A = 0,
> +	B,
> +	C,
> +	D,
> +};

You are just using timer A, so this enum is unnecessary. Please use a 
define instead. Also it would be better, if the define would be 
explenatory then just the letter 'A'.

> +
> +#define TIMER_ISA_MUX		0
> +#define TIMER_ISA_E_VAL		0x14
> +#define TIMER_ISA_t_VAL(t)	((t + 1) << 2)
> +
> +#define TIMER_t_INPUT_BIT(t)	(2 * t)

Please put braces around 't'.

> +#define TIMER_E_INPUT_BIT	8

 From the enum above, missing timer E would be 4 so you can use the 
TIMER_t_INPUT_BIT(t) macro, right?

> +#define TIMER_t_INPUT_MASK(t)	(3UL << TIMER_t_INPUT_BIT(t))
> +#define TIMER_E_INPUT_MASK	(7UL << TIMER_E_INPUT_BIT)
> +#define TIMER_t_ENABLE_BIT(t)	(16 + t)
> +#define TIMER_E_ENABLE_BIT	20
> +#define TIMER_t_PERIODIC_BIT(t)	(12 + t)

Please put braces around 't'.

> +
> +#define TIMER_UNIT_1us		0
> +#define TIMER_E_UNIT_1us	1

Please don't use lower case characters in defines.

> +
> +static void __iomem *timer_base;
> +
> +static cycle_t cycle_read_timer_e(struct clocksource *cs)
> +{
> +	return (cycle_t)readl(timer_base + TIMER_ISA_E_VAL);
> +}
> +
> +static struct clocksource clocksource_timer_e = {
> +	.name	= "meson6_timerE",
> +	.rating	= 300,
> +	.read	= cycle_read_timer_e,
> +	.mask	= CLOCKSOURCE_MASK(32),
> +	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
> +};
> +
> +static u64 notrace meson6_timer_sched_read(void)
> +{
> +	return (u64)readl(timer_base + TIMER_ISA_E_VAL);
> +}
> +
> +static void meson6_clkevt_time_stop(unsigned char timer)
> +{
> +	u32 val = readl(timer_base + TIMER_ISA_MUX);
> +
> +	writel(val & ~TIMER_t_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
> +}
> +
> +static void meson6_clkevt_time_setup(unsigned char timer, unsigned long delay)
> +{
> +	writel(delay, timer_base + TIMER_ISA_t_VAL(timer));
> +}
> +
> +static void meson6_clkevt_time_start(unsigned char timer, bool periodic)
> +{
> +	u32 val = readl(timer_base + TIMER_ISA_MUX);
> +
> +	if (periodic)
> +		val |= TIMER_t_PERIODIC_BIT(timer);
> +	else
> +		val &= ~TIMER_t_PERIODIC_BIT(timer);
> +
> +	writel(val | TIMER_t_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
> +}
> +
> +static void meson6_clkevt_mode(enum clock_event_mode mode,
> +			       struct clock_event_device *clk)
> +{
> +	switch (mode) {
> +	case CLOCK_EVT_MODE_PERIODIC:
> +		meson6_clkevt_time_stop(A);
> +		meson6_clkevt_time_setup(A, USEC_PER_SEC/HZ - 1);
> +		meson6_clkevt_time_start(A, true);
> +		break;
> +	case CLOCK_EVT_MODE_ONESHOT:
> +		meson6_clkevt_time_stop(A);
> +		meson6_clkevt_time_start(A, false);
> +		break;
> +	case CLOCK_EVT_MODE_UNUSED:
> +	case CLOCK_EVT_MODE_SHUTDOWN:
> +	default:
> +		meson6_clkevt_time_stop(A);
> +		break;
> +	}
> +}
> +
> +static int meson6_clkevt_next_event(unsigned long evt,
> +				    struct clock_event_device *unused)
> +{
> +	meson6_clkevt_time_stop(A);
> +	meson6_clkevt_time_setup(A, evt);
> +	meson6_clkevt_time_start(A, false);
> +
> +	return 0;
> +}
> +
> +static struct clock_event_device meson6_clockevent = {
> +	.name		= "meson6_tick",
> +	.rating		= 400,
> +	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> +	.set_mode	= meson6_clkevt_mode,
> +	.set_next_event	= meson6_clkevt_next_event,
> +};
> +
> +static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
> +{
> +	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
> +
> +	evt->event_handler(evt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static struct irqaction meson6_timer_irq = {
> +	.name		= "meson6_timerA",
> +	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
> +	.handler	= meson6_timer_interrupt,
> +	.dev_id		= &meson6_clockevent,
> +};
> +
> +static void __init meson6_timer_init(struct device_node *node)
> +{
> +	u32 val;
> +	int ret, irq;
> +
> +	timer_base = of_iomap(node, 0);

Please use of_io_request_and_map instead.

> +	if (!timer_base)
> +		panic("Can't map registers");
> +
> +	irq = irq_of_parse_and_map(node, 0);
> +	if (irq <= 0)
> +		panic("Can't parse IRQ");
> +
> +	/* Set 1us for timer E */
> +	val = readl(timer_base + TIMER_ISA_MUX);
> +	val &= ~TIMER_E_INPUT_MASK;
> +	val |= TIMER_E_UNIT_1us << TIMER_E_INPUT_BIT;
> +	writel(val, timer_base + TIMER_ISA_MUX);
> +
> +	sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC);
> +	clocksource_register_khz(&clocksource_timer_e, 1000);

Why don't you use clocksource_mmio_init?

> +
> +	/* Timer A base 1us */
> +	val &= ~TIMER_t_INPUT_MASK(A);
> +	val |= TIMER_UNIT_1us << TIMER_t_INPUT_BIT(A);
> +	writel(val, timer_base + TIMER_ISA_MUX);

Is this dependant on any clocking of the timer?

> +
> +	/* Stop the timer A */
> +	meson6_clkevt_time_stop(A);
> +
> +	ret = setup_irq(irq, &meson6_timer_irq);
> +	if (ret)
> +		pr_warn("failed to setup irq %d\n", irq);
> +
> +	meson6_clockevent.cpumask = cpu_possible_mask;
> +	meson6_clockevent.irq = irq;
> +
> +	clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC,
> +					1, 0xfffe);
> +}
> +CLOCKSOURCE_OF_DECLARE(meson6, "amlogic,meson6-timer",
> +		       meson6_timer_init);
>