[PATCH 6/8] mtd: nand: add shared register defines for ST's NAND Controller drivers

Lee Jones lee.jones at linaro.org
Mon Aug 18 03:31:57 PDT 2014


Provide register and bit definitions used by STM's BCH Controller driver.
We place these into a shared location as they will be used by other STM
NAND Controllers as they appear.

Reviewed-By: Pekon Gupta <pekon at pek-sem.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mtd/nand/stm_nand_regs.h | 304 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 304 insertions(+)
 create mode 100644 drivers/mtd/nand/stm_nand_regs.h

diff --git a/drivers/mtd/nand/stm_nand_regs.h b/drivers/mtd/nand/stm_nand_regs.h
new file mode 100644
index 0000000..fe28364
--- /dev/null
+++ b/drivers/mtd/nand/stm_nand_regs.h
@@ -0,0 +1,304 @@
+/*
+ * drivers/mtd/nand/stm_nand_regs.h
+ *
+ * STMicroelectronics NAND Controller register definitions
+ *
+ * Copyright (c) 2008-2014 STMicroelectronics Limited
+ * Author: Angus Clark <Angus.Clark at st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef STM_NANDC_REGS_H
+#define STM_NANDC_REGS_H
+
+#define EMISS_CFG					0x1000
+
+/* Hamming Controller Registers (Offsets from EMINAND_BASE) */
+#define NANDHAM_BOOTBANK_CFG				0x000
+#define NANDHAM_RBN_STA					0x004
+#define NANDHAM_INT_EN					0x010
+#define NANDHAM_INT_STA					0x014
+#define NANDHAM_INT_CLR					0x018
+#define NANDHAM_INT_EDGE_CFG				0x01C
+#define NANDHAM_CTL_TIMING				0x040
+#define NANDHAM_WEN_TIMING				0x044
+#define NANDHAM_REN_TIMING				0x048
+#define NANDHAM_BLOCK_ZERO_REMAP_REG			0x04C
+#define NANDHAM_FLEXMODE_CFG				0x100
+#define NANDHAM_FLEX_MUXCTRL				0x104
+#define NANDHAM_FLEX_DATAWRITE_CONFIG			0x10C
+#define NANDHAM_FLEX_DATAREAD_CONFIG			0x110
+#define NANDHAM_FLEX_CMD				0x114
+#define NANDHAM_FLEX_ADD				0x118
+#define NANDHAM_FLEX_DATA				0x120
+#define NANDHAM_VERSION_REG				0x144
+#define NANDHAM_MULTI_CS_CONFIG_REG			0x1EC
+#define NANDHAM_AFM_SEQ_REG_1				0x200
+#define NANDHAM_AFM_SEQ_REG_2				0x204
+#define NANDHAM_AFM_SEQ_REG_3				0x208
+#define NANDHAM_AFM_SEQ_REG_4				0x20C
+#define NANDHAM_AFM_ADD					0x210
+#define NANDHAM_AFM_EXTRA				0x214
+#define NANDHAM_AFM_CMD					0x218
+#define NANDHAM_AFM_SEQ_CFG				0x21C
+#define NANDHAM_AFM_GEN_CFG				0x220
+#define NANDHAM_AFM_SEQ_STA				0x240
+#define NANDHAM_AFM_ECC_REG_0				0x280
+#define NANDHAM_AFM_ECC_REG_1				0x284
+#define NANDHAM_AFM_ECC_REG_2				0x288
+#define NANDHAM_AFM_ECC_REG_3				0x28C
+#define NANDHAM_AFM_DATA_FIFO				0x300
+
+/* BCH Controller Registers (Offsets from EMI_NAND) */
+#define NANDBCH_BOOTBANK_CFG				0x000
+#define NANDBCH_RBN_STA					0x004
+#define NANDBCH_INT_EN					0x010
+#define NANDBCH_INT_STA					0x014
+#define NANDBCH_INT_CLR					0x018
+#define NANDBCH_INT_EDGE_CFG				0x01C
+#define NANDBCH_CTL_TIMING				0x040
+#define NANDBCH_WEN_TIMING				0x044
+#define NANDBCH_REN_TIMING				0x048
+#define NANDBCH_BLOCK_ZERO_REMAP_REG			0x04C
+#define NANDBCH_BOOT_STATUS				0x050
+#define NANDBCH_FALSE_BOOT_REG				0x054
+#define NANDBCH_FALSE_BOOT_STATUS			0x058
+#define NANDBCH_CONTROLLER_CFG				0x100
+#define NANDBCH_FLEX_MUXCTRL				0x104
+#define NANDBCH_FLEX_DATAWRITE_CONFIG			0x10C
+#define NANDBCH_FLEX_DATAREAD_CONFIG			0x110
+#define NANDBCH_VERSION_REG				0x144
+#define NANDBCH_ADDRESS_REG_1				0x1F0
+#define NANDBCH_ADDRESS_REG_2				0x1F4
+#define NANDBCH_ADDRESS_REG_3				0x1F8
+#define NANDBCH_MULTI_CS_CONFIG_REG			0x1FC
+#define NANDBCH_SEQ_REG_1				0x200
+#define NANDBCH_SEQ_REG_2				0x204
+#define NANDBCH_SEQ_REG_3				0x208
+#define NANDBCH_SEQ_REG_4				0x20C
+#define NANDBCH_ADD					0x210
+#define NANDBCH_EXTRA_REG				0x214
+#define NANDBCH_CMD					0x218
+#define NANDBCH_GEN_CFG					0x220
+#define NANDBCH_DELAY_REG				0x224
+#define NANDBCH_SEQ_CFG					0x22C
+#define NANDBCH_SEQ_STA					0x270
+#define NANDBCH_DATA_BUFFER_ENTRY_0			0x280
+#define NANDBCH_DATA_BUFFER_ENTRY_1			0x284
+#define NANDBCH_DATA_BUFFER_ENTRY_2			0x288
+#define NANDBCH_DATA_BUFFER_ENTRY_3			0x28C
+#define NANDBCH_DATA_BUFFER_ENTRY_4			0x290
+#define NANDBCH_DATA_BUFFER_ENTRY_5			0x294
+#define NANDBCH_DATA_BUFFER_ENTRY_6			0x298
+#define NANDBCH_DATA_BUFFER_ENTRY_7			0x29C
+#define NANDBCH_ECC_SCORE_REG_A				0x2A0
+#define NANDBCH_ECC_SCORE_REG_B				0x2A4
+#define NANDBCH_CHECK_STATUS_REG_A			0x2A8
+#define NANDBCH_CHECK_STATUS_REG_B			0x2AC
+#define NANDBCH_BUFFER_LIST_PTR				0x300
+#define NANDBCH_SEQ_PTR_REG				0x304
+#define NANDBCH_ERROR_THRESHOLD_REG			0x308
+
+#define EMISS_NAND_DMA					0x0800
+/* EMISS NAND BCH STPLUG Registers (Offsets from EMISS_NAND_DMA) */
+#define EMISS_NAND_RD_DMA_PAGE_SIZE			0x000
+#define EMISS_NAND_RD_DMA_MAX_OPCODE_SIZE		0x004
+#define EMISS_NAND_RD_DMA_MIN_OPCODE_SIZE		0x008
+#define EMISS_NAND_RD_DMA_MAX_CHUNK_SIZE		0x00C
+#define EMISS_NAND_RD_DMA_MAX_MESSAGE_SIZE		0x010
+
+#define EMISS_NAND_WR_DMA_PAGE_SIZE			0x100
+#define EMISS_NAND_WR_DMA_MAX_OPCODE_SIZE		0x104
+#define EMISS_NAND_WR_DMA_MIN_OPCODE_SIZE		0x108
+#define EMISS_NAND_WR_DMA_MAX_CHUNK_SIZE		0x10C
+#define EMISS_NAND_WR_DMA_MAX_MESSAGE_SIZE		0x110
+
+/*
+ * Hamming/BCH controller interrupts
+ */
+
+/* NANDxxx_INT_EN/NANDxxx_INT_STA */
+/*      Common */
+#define NAND_INT_ENABLE				(0x1 << 0)
+#define NAND_INT_RBN				(0x1 << 2)
+#define NAND_INT_SEQCHECK			(0x1 << 5)
+/*      Hamming only */
+#define NANDHAM_INT_DATA_DREQ			(0x1 << 3)
+#define NANDHAM_INT_SEQ_DREQ			(0x1 << 4)
+#define NANDHAM_INT_ECC_FIX_REQ			(0x1 << 6)
+/*      BCH only */
+#define NANDBCH_INT_SEQNODESOVER		(0x1 << 7)
+#define NANDBCH_INT_ECCTHRESHOLD		(0x1 << 8)
+
+/* NANDxxx_INT_CLR */
+/*      Common */
+#define NAND_INT_CLR_RBN			(0x1 << 2)
+#define NAND_INT_CLR_SEQCHECK			(0x1 << 3)
+/*      Hamming only */
+#define NANDHAM_INT_CLR_ECC_FIX_REQ		(0x1 << 4)
+#define NANDHAM_INT_CLR_DATA_DREQ		(0x1 << 5)
+#define NANDHAM_INT_CLR_SEQ_DREQ		(0x1 << 6)
+/*      BCH only */
+#define NANDBCH_INT_CLR_SEQNODESOVER		(0x1 << 5)
+#define NANDBCH_INT_CLR_ECCTHRESHOLD		(0x1 << 6)
+
+/* NANDxxx_INT_EDGE_CFG */
+#define NAND_EDGE_CFG_RBN_RISING		0x1
+#define NAND_EDGE_CFG_RBN_FALLING		0x2
+#define NAND_EDGE_CFG_RBN_ANY			0x3
+
+/* NANDBCH_CONTROLLER_CFG/NANDHAM_FLEXMODE_CFG */
+#define CFG_ENABLE_FLEX				0x1
+#define CFG_ENABLE_AFM				0x2
+#define CFG_RESET				(0x1 << 3)
+#define CFG_RESET_ECC(x)			(0x1 << (7 + (x)))
+#define CFG_RESET_ECC_ALL			(0xff << 7)
+
+
+/*
+ * BCH Controller
+ */
+
+/* NANDBCH_BOOTBANK_CFG */
+#define BOOT_CFG_RESET				(0x1 << 3)
+
+/* NANDBCH_CTL_TIMING */
+#define NANDBCH_CTL_SETUP(x)			((x) & 0xff)
+#define NANDBCH_CTL_HOLD(x)			(((x) & 0xff) << 8)
+#define NANDBCH_CTL_WERBN(x)			(((x) & 0xff) << 24)
+
+/* NANDBCH_WEN_TIMING */
+#define NANDBCH_WEN_ONTIME(x)			((x) & 0xff)
+#define NANDBCH_WEN_OFFTIME(x)			(((x) & 0xff) << 8)
+#define NANDBCH_WEN_ONHALFCYCLE			(0x1 << 16)
+#define NANDBCH_WEN_OFFHALFCYCLE		(0x1 << 17)
+
+/* NANDBCH_REN_TIMING */
+#define NANDBCH_REN_ONTIME(x)			((x) & 0xff)
+#define NANDBCH_REN_OFFTIME(x)			(((x) & 0xff) << 8)
+#define NANDBCH_REN_ONHALFCYCLE			(0x1 << 16)
+#define NANDBCH_REN_OFFHALFCYCLE		(0x1 << 17)
+#define NANDBCH_REN_TELQV(x)			(((x) & 0xff) << 24)
+
+/* NANDBCH_BLOCK_ZERO_REMAP_REG */
+#define NANDBCH_BACKUP_COPY_FOUND		(0x1 << 0)
+#define NANDBCH_ORIG_CODE_CORRUPTED		(0x1 << 1)
+#define NANDBCH_BLK_ZERO_REMAP(x)		((x) >> 14)
+
+/* NANDBCH_BOOT_STATUS */
+#define NANDBCH_BOOT_MAX_ERRORS(x)		((x) & 0x1f)
+
+/* NANDBCH_GEN_CFG */
+#define GEN_CFG_DATA_8_NOT_16			(0x1 << 16)
+#define GEN_CFG_EXTRA_ADD_CYCLE			(0x1 << 18)
+#define GEN_CFG_2X8_MODE			(0x1 << 19)
+#define GEN_CFG_ECC_SHIFT			20
+#define GEN_CFG_18BIT_ECC			(BCH_18BIT_ECC << \
+						GEN_CFG_ECC_SHIFT)
+#define GEN_CFG_30BIT_ECC			(BCH_30BIT_ECC << \
+						GEN_CFG_ECC_SHIFT)
+#define GEN_CFG_NO_ECC				(BCH_NO_ECC    << \
+						GEN_CFG_ECC_SHIFT)
+#define GEN_CFG_LAST_SEQ_NODE			(0x1 << 22)
+
+/* NANDBCH_SEQ_CFG */
+#define SEQ_CFG_REPEAT_COUNTER(x)		((x) & 0xffff)
+#define SEQ_CFG_SEQ_IDENT(x)			(((x) & 0xff) << 16)
+#define SEQ_CFG_DATA_WRITE			(0x1 << 24)
+#define SEQ_CFG_ERASE				(0x1 << 25)
+#define SEQ_CFG_GO_STOP				(0x1 << 26)
+
+/* NANDBCH_SEQ_STA */
+#define SEQ_STA_RUN				(0x1 << 4)
+
+/*
+ * BCH Commands
+ */
+#define BCH_OPC_STOP			0x0
+#define BCH_OPC_CMD			0x1
+#define BCH_OPC_INC			0x2
+#define BCH_OPC_DEC_JUMP		0x3
+#define BCH_OPC_DATA			0x4
+#define BCH_OPC_DELAY			0x5
+#define BCH_OPC_CHECK			0x6
+#define BCH_OPC_ADDR			0x7
+#define BCH_OPC_NEXT_CHIP_ON		0x8
+#define BCH_OPC_DEC_JMP_MCS		0x9
+#define BCH_OPC_ECC_SCORE		0xA
+
+#define BCH_INSTR(opc, opr)		((opc) | ((opr) << 4))
+
+#define BCH_CMD_ADDR			BCH_INSTR(BCH_OPC_CMD, 0)
+#define BCH_CL_CMD_1			BCH_INSTR(BCH_OPC_CMD, 1)
+#define BCH_CL_CMD_2			BCH_INSTR(BCH_OPC_CMD, 2)
+#define BCH_CL_CMD_3			BCH_INSTR(BCH_OPC_CMD, 3)
+#define BCH_CL_EX_0			BCH_INSTR(BCH_OPC_CMD, 4)
+#define BCH_CL_EX_1			BCH_INSTR(BCH_OPC_CMD, 5)
+#define BCH_CL_EX_2			BCH_INSTR(BCH_OPC_CMD, 6)
+#define BCH_CL_EX_3			BCH_INSTR(BCH_OPC_CMD, 7)
+#define BCH_INC(x)			BCH_INSTR(BCH_OPC_INC, (x))
+#define BCH_DEC_JUMP(x)			BCH_INSTR(BCH_OPC_DEC_JUMP, (x))
+#define BCH_STOP			BCH_INSTR(BCH_OPC_STOP, 0)
+#define BCH_DATA_1_SECTOR		BCH_INSTR(BCH_OPC_DATA, 0)
+#define BCH_DATA_2_SECTOR		BCH_INSTR(BCH_OPC_DATA, 1)
+#define BCH_DATA_4_SECTOR		BCH_INSTR(BCH_OPC_DATA, 2)
+#define BCH_DATA_8_SECTOR		BCH_INSTR(BCH_OPC_DATA, 3)
+#define BCH_DATA_16_SECTOR		BCH_INSTR(BCH_OPC_DATA, 4)
+#define BCH_DATA_32_SECTOR		BCH_INSTR(BCH_OPC_DATA, 5)
+#define BCH_DELAY_0			BCH_INSTR(BCH_OPC_DELAY, 0)
+#define BCH_DELAY_1			BCH_INSTR(BCH_OPC_DELAY, 1)
+#define BCH_OP_ERR			BCH_INSTR(BCH_OPC_CHECK, 0)
+#define BCH_CACHE_ERR			BCH_INSTR(BCH_OPC_CHECK, 1)
+#define BCH_ERROR			BCH_INSTR(BCH_OPC_CHECK, 2)
+#define BCH_AL_EX_0			BCH_INSTR(BCH_OPC_ADDR, 0)
+#define BCH_AL_EX_1			BCH_INSTR(BCH_OPC_ADDR, 1)
+#define BCH_AL_EX_2			BCH_INSTR(BCH_OPC_ADDR, 2)
+#define BCH_AL_EX_3			BCH_INSTR(BCH_OPC_ADDR, 3)
+#define BCH_AL_AD_0			BCH_INSTR(BCH_OPC_ADDR, 4)
+#define BCH_AL_AD_1			BCH_INSTR(BCH_OPC_ADDR, 5)
+#define BCH_AL_AD_2			BCH_INSTR(BCH_OPC_ADDR, 6)
+#define BCH_AL_AD_3			BCH_INSTR(BCH_OPC_ADDR, 7)
+#define BCH_NEXT_CHIP_ON		BCH_INSTR(BCH_OPC_NEXT_CHIP_ON, 0)
+#define BCH_DEC_JMP_MCS(x)		BCH_INSTR(BCH_OPC_DEC_JMP_MCS, (x))
+#define BCH_ECC_SCORE(x)		BCH_INSTR(BCH_OPC_ECC_SCORE, (x))
+
+
+/*
+ * Hamming-FLEX register fields
+ */
+
+/* NANDHAM_FLEX_DATAREAD/WRITE_CONFIG */
+#define FLEX_DATA_CFG_WAIT_RBN			(0x1 << 27)
+#define FLEX_DATA_CFG_BEATS_1			(0x1 << 28)
+#define FLEX_DATA_CFG_BEATS_2			(0x2 << 28)
+#define FLEX_DATA_CFG_BEATS_3			(0x3 << 28)
+#define FLEX_DATA_CFG_BEATS_4			(0x0 << 28)
+#define FLEX_DATA_CFG_BYTES_1			(0x0 << 30)
+#define FLEX_DATA_CFG_BYTES_2			(0x1 << 30)
+#define FLEX_DATA_CFG_CSN			(0x1 << 31)
+
+/* NANDHAM_FLEX_CMD */
+#define FLEX_CMD_RBN				(0x1 << 27)
+#define FLEX_CMD_BEATS_1			(0x1 << 28)
+#define FLEX_CMD_BEATS_2			(0x2 << 28)
+#define FLEX_CMD_BEATS_3			(0x3 << 28)
+#define FLEX_CMD_BEATS_4			(0x0 << 28)
+#define FLEX_CMD_CSN				(0x1 << 31)
+#define FLEX_CMD(x)				(((x) & 0xff) |	\
+						 FLEX_CMD_RBN |	\
+						 FLEX_CMD_BEATS_1 |	\
+						 FLEX_CMD_CSN)
+/* NANDHAM_FLEX_ADD */
+#define FLEX_ADDR_RBN				(0x1 << 27)
+#define FLEX_ADDR_BEATS_1			(0x1 << 28)
+#define FLEX_ADDR_BEATS_2			(0x2 << 28)
+#define FLEX_ADDR_BEATS_3			(0x3 << 28)
+#define FLEX_ADDR_BEATS_4			(0x0 << 28)
+#define FLEX_ADDR_ADD8_VALID			(0x1 << 30)
+#define FLEX_ADDR_CSN				(0x1 << 31)
+
+#endif /* STM_NANDC_REGS_H */
-- 
1.9.1




More information about the linux-arm-kernel mailing list