[PATCH v4] irqchip: gic: Allow gic_arch_extn hooks to call into scheduler

[Russell King - ARM Linux]

On Sun, Aug 17, 2014 at 01:32:36PM -0400, Jason Cooper wrote:
> Stephen,
> 
> On Wed, Aug 13, 2014 at 06:57:18AM -0700, Stephen Boyd wrote:
> > Commit 1a6b69b6548c (ARM: gic: add CPU migration support,
> > 2012-04-12) introduced an acquisition of the irq_controller_lock
> > in gic_raise_softirq() which can lead to a spinlock recursion if
> > the gic_arch_extn hooks call into the scheduler (via complete()
> > or wake_up(), etc.). This happens because gic_arch_extn hooks are
> > normally called with the irq_controller_lock held and calling
> > into the scheduler may cause us to call smp_send_reschedule()
> > which will grab the irq_controller_lock again. Here's an example
> > from a vendor kernel (note that the gic_arch_extn hook code here
> > isn't actually in mainline):
> > 
> > BUG: spinlock recursion on CPU#0, swapper/0/1
> >  lock: irq_controller_lock+0x0/0x18, .magic: dead4ead, .owner: sw
> > er_cpu: 0
> > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.10-00430-g3d433c4e
> > 
> > Call trace:
> > [<ffffffc000087e1c>] dump_backtrace+0x0/0x140
> > [<ffffffc000087f6c>] show_stack+0x10/0x1c
> > [<ffffffc00064732c>] dump_stack+0x74/0xc4
> > [<ffffffc0006446c0>] spin_dump+0x78/0x88
> > [<ffffffc0006446f4>] spin_bug+0x24/0x34
> > [<ffffffc0000d47d0>] do_raw_spin_lock+0x58/0x148
> > [<ffffffc00064d398>] _raw_spin_lock_irqsave+0x24/0x38
> > [<ffffffc0002c9d7c>] gic_raise_softirq+0x2c/0xbc
> > [<ffffffc00008daa4>] smp_send_reschedule+0x34/0x40
> > [<ffffffc0000c1e94>] try_to_wake_up+0x224/0x288
> > [<ffffffc0000c1f4c>] default_wake_function+0xc/0x18
> > [<ffffffc0000ceef0>] __wake_up_common+0x50/0x8c
> > [<ffffffc0000cef3c>] __wake_up_locked+0x10/0x1c
> > [<ffffffc0000cf734>] complete+0x3c/0x5c
> > [<ffffffc0002f0e78>] msm_mpm_enable_irq_exclusive+0x1b8/0x1c8
> > [<ffffffc0002f0f58>] __msm_mpm_enable_irq+0x4c/0x7c
> > [<ffffffc0002f0f94>] msm_mpm_enable_irq+0xc/0x18
> > [<ffffffc0002c9bb0>] gic_unmask_irq+0x40/0x7c
> > [<ffffffc0000de5f4>] irq_enable+0x2c/0x48
> > [<ffffffc0000de65c>] irq_startup+0x4c/0x74
> > [<ffffffc0000dd2fc>] __setup_irq+0x264/0x3f0
> > [<ffffffc0000dd5e0>] request_threaded_irq+0xcc/0x11c
> > [<ffffffc0000df254>] devm_request_threaded_irq+0x68/0xb4
> > [<ffffffc000471520>] msm_iommu_ctx_probe+0x124/0x2d4
> > [<ffffffc000337374>] platform_drv_probe+0x20/0x54
> > [<ffffffc00033598c>] driver_probe_device+0x158/0x340
> > [<ffffffc000335c20>] __driver_attach+0x60/0x90
> > [<ffffffc000333c9c>] bus_for_each_dev+0x6c/0x8c
> > [<ffffffc000335304>] driver_attach+0x1c/0x28
> > [<ffffffc000334f14>] bus_add_driver+0x120/0x204
> > [<ffffffc0003362e4>] driver_register+0xbc/0x10c
> > [<ffffffc000337348>] __platform_driver_register+0x5c/0x68
> > [<ffffffc00094c478>] msm_iommu_driver_init+0x54/0x7c
> > [<ffffffc0000813ec>] do_one_initcall+0xa4/0x130
> > [<ffffffc00091d928>] kernel_init_freeable+0x138/0x1dc
> > [<ffffffc000642578>] kernel_init+0xc/0xd4
> > 
> > We really just want to synchronize the sending of an SGI with the
> > update of the gic_cpu_map[], so introduce a new SGI lock that we
> > can use to synchronize the two code paths. Three main events are
> > happening that we have to consider:
> > 
> > 	1. We're updating the gic_cpu_mask to point to an
> > 	incoming CPU
> > 
> > 	2. We're (potentially) sending an SGI to the outgoing CPU
> > 
> > 	3. We're redirecting any pending SGIs for the outgoing
> > 	CPU to the incoming CPU.
> > 
> > Events 1 and 3 are already ordered within the same CPU by means
> > of program order and use of I/O accessors. Events 1 and 2 don't
> > need to be ordered, but events 2 and 3 do because any SGIs for
> > the outgoing CPU need to be pending before we can redirect them.
> > Synchronize by acquiring a new lock around event 2 and before
> > event 3. Use smp_mb__after_unlock_lock() before event 3 to ensure
> > that event 1 is seen before event 3 on other CPUs that may be
> > executing event 2. We put this all behind the b.L switcher config
> > option so that if we're not using this feature we don't have to
> > acquire any locks at all in the IPI path.
> > 
> > Cc: Nicolas Pitre <nico at linaro.org>
> > Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
> > ---
> >  drivers/irqchip/irq-gic.c | 23 +++++++++++++++++++++--
> >  1 file changed, 21 insertions(+), 2 deletions(-)
> 
> Applied to irqchip/urgent with Nico's Ack.

Interesting, so I'm discussing this patch, and it gets applied anyway...
yes, that's great.

-- 
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.