[PATCH 11/12] ARM: dts: sun8i: Add i2c controller nodes

[Chen-Yu Tsai]

Hi,

On Sun, Aug 17, 2014 at 4:02 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Hi,
>
> On Sun, Aug 17, 2014 at 11:52:17AM +0800, Chen-Yu Tsai wrote:
>> Add nodes for the 3 i2c controllers found on A23 SoCs to the sun8i DTSI.
>>
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>>  arch/arm/boot/dts/sun8i-a23.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
>> index 4658998..53ef350 100644
>> --- a/arch/arm/boot/dts/sun8i-a23.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-a23.dtsi
>> @@ -387,6 +387,42 @@
>>                       status = "disabled";
>>               };
>>
>> +             i2c0: i2c at 01c2ac00 {
>> +                     compatible = "allwinner,sun6i-a31-i2c";
>> +                     reg = <0x01c2ac00 0x400>;
>> +                     interrupts = <0 6 4>;
>> +                     clocks = <&apb2_gates 0>;
>> +                     clock-frequency = <100000>;
>
> It's the default, you don't need to set it.

Ah, just checked the driver, it is indeed the default.
All the other sunxi dtsi have it though. Do we want to be consistent?


ChenYu