[PATCH 03/12] ARM: dts: sun8i: Add pinmux set for uart0

[Chen-Yu Tsai]

uart0 on sun8i is only muxed with mmc0, which makes it a poor choice
for the console. However, some tablets only have pads for uart0
available on the circuit board.

Here we add the uart0 pinmux set for people who need it.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun8i-a23.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index a40e632..0d6bb6d 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -199,6 +199,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0 at 0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		ahb1_rst: reset at 01c202c0 {
-- 
2.1.0