[PATCH 2/2 V4] irqchip: gicv2m: Add support for multiple MSI for ARM64 GICv2m
Marc Zyngier
marc.zyngier at arm.com
Fri Aug 15 06:31:51 PDT 2014
Hi Suravee,
On Wed, Aug 13 2014 at 4:00:41 pm BST, "suravee.suthikulpanit at amd.com" <suravee.suthikulpanit at amd.com> wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
>
> This patch extend GICv2m MSI to support multiple MSI in ARM64.
>
> This requires the common arch_setup_msi_irqs() to be overwriten
> with ARM64 version which does not return 1 for PCI_CAP_ID_MSI and
> nvec > 1.
>
> Cc: Mark Rutland <Mark.Rutland at arm.com>
> Cc: Marc Zyngier <Marc.Zyngier at arm.com>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Catalin Marinas <Catalin.Marinas at arm.com>
> Cc: Will Deacon <Will.Deacon at arm.com>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
> ---
> arch/arm64/include/asm/msi.h | 15 ++++++++
> arch/arm64/kernel/Makefile | 1 +
> arch/arm64/kernel/msi.c | 57 +++++++++++++++++++++++++++++++
> drivers/irqchip/irq-gic-v2m.c | 79 +++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 152 insertions(+)
> create mode 100644 arch/arm64/include/asm/msi.h
> create mode 100644 arch/arm64/kernel/msi.c
>
> diff --git a/arch/arm64/include/asm/msi.h b/arch/arm64/include/asm/msi.h
> new file mode 100644
> index 0000000..2a0944a
> --- /dev/null
> +++ b/arch/arm64/include/asm/msi.h
> @@ -0,0 +1,15 @@
> +#ifndef _ASM_ARM64_MSI_H_
> +#define _ASM_ARM64_MSI_H_
> +
> +struct pci_dev;
> +struct msi_desc;
> +
> +struct arm64_msi_ops {
> + int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
> + void (*teardown_msi_irqs)(struct pci_dev *dev);
> +};
> +
> +extern struct arm64_msi_ops arm64_msi;
> +extern int arm64_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
> +
> +#endif /* _ASM_ARM64_MSI_H_ */
> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
> index cdaedad..0636e27 100644
> --- a/arch/arm64/kernel/Makefile
> +++ b/arch/arm64/kernel/Makefile
> @@ -29,6 +29,7 @@ arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
> arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
> arm64-obj-$(CONFIG_KGDB) += kgdb.o
> arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
> +arm64-obj-$(CONFIG_PCI_MSI) += msi.o
>
> obj-y += $(arm64-obj-y) vdso/
> obj-m += $(arm64-obj-m)
> diff --git a/arch/arm64/kernel/msi.c b/arch/arm64/kernel/msi.c
> new file mode 100644
> index 0000000..ed62397
> --- /dev/null
> +++ b/arch/arm64/kernel/msi.c
> @@ -0,0 +1,57 @@
> +/*
> + * ARM64 architectural MSI implemention
> + *
> + * Support for Message Signalelled Interrupts for systems that
> + * implement ARM Generic Interrupt Controller: GICv2m.
> + *
> + * Copyright (C) 2014 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/msi.h>
> +#include <linux/pci.h>
> +
> +#include <asm/msi.h>
> +
> +/*
> + * ARM64 function for seting up MSI irqs.
> + * Copied from driver/pci/msi.c: arch_setup_msi_irqs().
> + */
> +int arm64_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> + struct msi_desc *entry;
> + int ret;
> +
> + if (type == PCI_CAP_ID_MSI && nvec > 1)
> + return 1;
> +
> + list_for_each_entry(entry, &dev->msi_list, list) {
> + ret = arch_setup_msi_irq(dev, entry);
> + if (ret < 0)
> + return ret;
> + if (ret > 0)
> + return -ENOSPC;
> + }
> +
> + return 0;
> +}
I'm going to reiterate what I said last time: Why do we need this?
So far, we have two MSI-capable controllers on their way upstream:
GICv2m and GICv3. Both are perfectly capable of handling more than a
single MSI per device.
So why should we cater for this? My gut feeling is that we should just
have:
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
struct msi_desc *entry;
int ret;
/*
* So far, all our MSI controllers are capable of handling more
* than a single MSI per device. Should we encounter less
* capable devices, we'll consider doing something special for
* them.
*/
list_for_each_entry(entry, &dev->msi_list, list) {
ret = arch_setup_msi_irq(dev, entry);
if (ret < 0)
return ret;
if (ret > 0)
return -ENOSPC;
}
return 0;
}
and nothing else. Your driver should be able to retrieve the number of
MSI needed by the device, and allocate them. GICv3 manages it, and so
should GICv2m.
> +
> +struct arm64_msi_ops arm64_msi = {
> + .setup_msi_irqs = arm64_setup_msi_irqs,
> + .teardown_msi_irqs = default_teardown_msi_irqs,
> +};
> +
> +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> + return arm64_msi.setup_msi_irqs(dev, nvec, type);
> +}
> +
> +void arch_teardown_msi_irqs(struct pci_dev *dev)
> +{
> + arm64_msi.teardown_msi_irqs(dev);
> +}
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> index 1ac0ace..21221e9 100644
> --- a/drivers/irqchip/irq-gic-v2m.c
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -24,6 +24,10 @@
> #include <linux/of_pci.h>
> #include <linux/bitmap.h>
>
> +#ifdef CONFIG_ARM64
> +#include <asm/msi.h>
> +#endif
> +
> #include "irqchip.h"
> #include "irq-gic.h"
>
> @@ -146,6 +150,79 @@ static void gicv2m_unmask_irq(struct irq_data *d)
> unmask_msi_irq(d);
> }
>
> +/*
> + * _gicv2m_setup_msi_irqs - Setup MSI interrupts for the given PCI device.
> + * This overrides the weak definition in ./drivers/pci/msi.c.
> + * If nvec interrupts are irqable, then assign it to PCI device.
> + * Otherwise return error.
> + *
> + * @pdev: PCI device which is requesting to enable MSI
> + * @nvec: number of MSI vectors
> + */
> +static int _gicv2m_setup_msi_irqs(struct pci_dev *pdev, int nvec)
> +{
> + int irq = 0, nvec_pow2 = 0, avail;
> + int i = 0;
> + struct msi_msg msg;
> + phys_addr_t addr;
> + struct msi_desc *entry;
> + struct msi_chip *chip = pdev->bus->msi;
> + struct v2m_data *data = container_of(chip, struct v2m_data, msi_chip);
> +
> + BUG_ON(list_empty(&pdev->msi_list));
> + WARN_ON(!list_is_singular(&pdev->msi_list));
> +
> + entry = list_first_entry(&pdev->msi_list, struct msi_desc, list);
> + WARN_ON(entry->irq);
> + WARN_ON(entry->msi_attrib.multiple);
> + WARN_ON(entry->nvec_used);
> + WARN_ON(!entry->dev);
> +
> + avail = alloc_msi_irq(data, nvec, &irq);
> + if (avail != 0) {
> + dev_err(&pdev->dev,
> + "GICv2m: Failed to allocate %d irqs.\n", nvec);
> + return avail;
> + }
> +
> + /* Set lowest of the new interrupts assigned to the PCI device */
> + nvec_pow2 = __roundup_pow_of_two(nvec);
> + entry->nvec_used = nvec;
> + entry->msi_attrib.multiple = ilog2(nvec_pow2);
> +
> + for (i = 0; i < nvec; i++) {
> + irq_set_chip_data(irq+i, chip);
> + if (irq_set_msi_desc_off(irq, i, entry)) {
> + dev_err(&pdev->dev,
> + "GICv2m: Failed to set up MSI irq %d\n",
> + (irq+i));
> + return -EINVAL;
> + }
> +
> + irq_set_irq_type((irq+i), IRQ_TYPE_EDGE_RISING);
> + }
> +
> + addr = data->res.start + V2M_MSI_SETSPI_NS;
> + msg.address_hi = (u32)(addr >> 32);
> + msg.address_lo = (u32)(addr);
> + msg.data = irq;
> + write_msi_msg(irq, &msg);
> +
> + return 0;
> +}
> +
> +static int
> +gicv2m_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +{
> + int ret;
> +
> + if (type == PCI_CAP_ID_MSI)
> + ret = _gicv2m_setup_msi_irqs(pdev, nvec);
> + else
> + ret = arm64_setup_msi_irqs(pdev, nvec, type);
> + return ret;
> +}
And this should go away as a consequence of the above.
> +
> static struct irq_chip gicv2m_chip;
>
> #ifdef CONFIG_OF
> @@ -156,6 +233,8 @@ gicv2m_of_init(struct device_node *node, struct gic_chip_data *gic)
> unsigned int val;
> struct v2m_data *v2m = &gic->v2m_data;
>
> + arm64_msi.setup_msi_irqs = &gicv2m_setup_msi_irqs;
> +
> v2m->msi_chip.owner = THIS_MODULE;
> v2m->msi_chip.of_node = node;
> v2m->msi_chip.setup_irq = gicv2m_setup_msi_irq;
Thanks,
M.
--
Jazz is not dead. It just smells funny.
More information about the linux-arm-kernel
mailing list