[PATCH v20 2/8] ARM: hisi: enable MCPM implementation
Haojian Zhuang
haojian.zhuang at linaro.org
Wed Aug 13 18:55:07 PDT 2014
Multiple CPU clusters are used in Hisilicon HiP04 SoC. Now use MCPM
framework to manage power on HiP04 SoC.
Changelog:
v20:
* Disable L2 prefetch when the whole cluster is down.
* Move disabling snoop filter into power_down() after L2 prefetch
disabled.
* Remove delay in wait_for_power_down() after L2 prefetch disabled.
* Add the sleep polling in wait_for_power_down() again since we
need to wait L2 when the cluster is down.
v19:
* Add comments on those delay hacks.
* Update on checking core enabled counts in wait_for_power_down().
v18:
* Fix to release resource in probe().
* Check whether cpu is already up in the process of making cpu down.
* Add udelay in power up/down sequence.
* Optimize on setting relocation entry.
* Optimize on polling status in wait_for_power_down().
* Add mcpm critical operations.
v17:
* Parse bootwrapper parameters in DTS file.
* Fix to use msleep() in spinlock region.
v16:
* Parse bootwrapper parameters in command line instead.
v13:
* Restore power down operation in MCPM.
* Fix disabling snoop filter issue in MCPM.
v12:
* Use wfi as power down state in MCPM.
* Remove wait_for_powerdown() in MCPM because wfi is used now.
Signed-off-by: Haojian Zhuang <haojian.zhuang at linaro.org>
---
arch/arm/mach-hisi/Makefile | 1 +
arch/arm/mach-hisi/platmcpm.c | 386 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 387 insertions(+)
create mode 100644 arch/arm/mach-hisi/platmcpm.c
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile
index ee2506b..d64831e 100644
--- a/arch/arm/mach-hisi/Makefile
+++ b/arch/arm/mach-hisi/Makefile
@@ -3,4 +3,5 @@
#
obj-y += hisilicon.o
+obj-$(CONFIG_MCPM) += platmcpm.o
obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
new file mode 100644
index 0000000..280f3f1
--- /dev/null
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -0,0 +1,386 @@
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/of_address.h>
+
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+#include <asm/mcpm.h>
+
+#include "core.h"
+
+/* bits definition in SC_CPU_RESET_REQ[x]/SC_CPU_RESET_DREQ[x]
+ * 1 -- unreset; 0 -- reset
+ */
+#define CORE_RESET_BIT(x) (1 << x)
+#define NEON_RESET_BIT(x) (1 << (x + 4))
+#define CORE_DEBUG_RESET_BIT(x) (1 << (x + 9))
+#define CLUSTER_L2_RESET_BIT (1 << 8)
+#define CLUSTER_DEBUG_RESET_BIT (1 << 13)
+
+/*
+ * bits definition in SC_CPU_RESET_STATUS[x]
+ * 1 -- reset status; 0 -- unreset status
+ */
+#define CORE_RESET_STATUS(x) (1 << x)
+#define NEON_RESET_STATUS(x) (1 << (x + 4))
+#define CORE_DEBUG_RESET_STATUS(x) (1 << (x + 9))
+#define CLUSTER_L2_RESET_STATUS (1 << 8)
+#define CLUSTER_DEBUG_RESET_STATUS (1 << 13)
+#define CORE_WFI_STATUS(x) (1 << (x + 16))
+#define CORE_WFE_STATUS(x) (1 << (x + 20))
+#define CORE_DEBUG_ACK(x) (1 << (x + 24))
+
+#define SC_CPU_RESET_REQ(x) (0x520 + (x << 3)) /* reset */
+#define SC_CPU_RESET_DREQ(x) (0x524 + (x << 3)) /* unreset */
+#define SC_CPU_RESET_STATUS(x) (0x1520 + (x << 3))
+
+#define FAB_SF_MODE 0x0c
+#define FAB_SF_INVLD 0x10
+
+/* bits definition in FB_SF_INVLD */
+#define FB_SF_INVLD_START (1 << 8)
+
+#define HIP04_MAX_CLUSTERS 4
+#define HIP04_MAX_CPUS_PER_CLUSTER 4
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static void __iomem *sysctrl, *fabric;
+static int hip04_cpu_table[HIP04_MAX_CLUSTERS][HIP04_MAX_CPUS_PER_CLUSTER];
+static DEFINE_SPINLOCK(boot_lock);
+static u32 fabric_phys_addr;
+/*
+ * [0]: bootwrapper physical address
+ * [1]: bootwrapper size
+ * [2]: relocation address
+ * [3]: relocation size
+ */
+static u32 hip04_boot_method[4];
+
+static bool hip04_cluster_is_down(unsigned int cluster)
+{
+ int i;
+
+ for (i = 0; i < HIP04_MAX_CPUS_PER_CLUSTER; i++)
+ if (hip04_cpu_table[cluster][i])
+ return false;
+ return true;
+}
+
+static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on)
+{
+ unsigned long data;
+
+ if (!fabric)
+ BUG();
+ data = readl_relaxed(fabric + FAB_SF_MODE);
+ if (on)
+ data |= 1 << cluster;
+ else
+ data &= ~(1 << cluster);
+ writel_relaxed(data, fabric + FAB_SF_MODE);
+ do {
+ cpu_relax();
+ } while (data != readl_relaxed(fabric + FAB_SF_MODE));
+}
+
+static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
+{
+ unsigned long data;
+ void __iomem *sys_dreq, *sys_status;
+
+ if (!sysctrl)
+ return -ENODEV;
+ if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER)
+ return -EINVAL;
+
+ spin_lock_irq(&boot_lock);
+
+ if (hip04_cpu_table[cluster][cpu])
+ goto out;
+
+ sys_dreq = sysctrl + SC_CPU_RESET_DREQ(cluster);
+ sys_status = sysctrl + SC_CPU_RESET_STATUS(cluster);
+ if (hip04_cluster_is_down(cluster)) {
+ data = CLUSTER_DEBUG_RESET_BIT;
+ writel_relaxed(data, sys_dreq);
+ do {
+ cpu_relax();
+ data = readl_relaxed(sys_status);
+ } while (data & CLUSTER_DEBUG_RESET_STATUS);
+ }
+
+ data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \
+ CORE_DEBUG_RESET_BIT(cpu);
+ writel_relaxed(data, sys_dreq);
+ do {
+ cpu_relax();
+ } while (data == readl_relaxed(sys_status));
+ /*
+ * We may fail to power up core again without this delay.
+ * It's not mentioned in document. It's found by test.
+ */
+ udelay(20);
+out:
+ hip04_cpu_table[cluster][cpu]++;
+ spin_unlock_irq(&boot_lock);
+
+ return 0;
+}
+
+static void hip04_mcpm_power_down(void)
+{
+ unsigned int mpidr, cpu, cluster;
+ bool skip_wfi = false, last_man = false;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ __mcpm_cpu_going_down(cpu, cluster);
+
+ spin_lock(&boot_lock);
+ BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+ hip04_cpu_table[cluster][cpu]--;
+ if (hip04_cpu_table[cluster][cpu] == 1) {
+ /* A power_up request went ahead of us. */
+ skip_wfi = true;
+ } else if (hip04_cpu_table[cluster][cpu] > 1) {
+ pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu);
+ BUG();
+ }
+
+ last_man = hip04_cluster_is_down(cluster);
+ if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+ spin_unlock(&boot_lock);
+ /* Since it's Cortex A15, disable L2 prefetching. */
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3 \n\t"
+ "isb \n\t"
+ "dsb "
+ : : "r" (0x400) );
+ v7_exit_coherency_flush(all);
+ hip04_set_snoop_filter(cluster, 0);
+ __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+ } else {
+ spin_unlock(&boot_lock);
+ v7_exit_coherency_flush(louis);
+ }
+
+ __mcpm_cpu_down(cpu, cluster);
+
+ if (!skip_wfi)
+ wfi();
+}
+
+static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int data, tries, count;
+ int ret = -ETIMEDOUT;
+
+ BUG_ON(cluster >= HIP04_MAX_CLUSTERS ||
+ cpu >= HIP04_MAX_CPUS_PER_CLUSTER);
+
+ count = TIMEOUT_MSEC / POLL_MSEC;
+ spin_lock_irq(&boot_lock);
+ for (tries = 0; tries < count; tries++) {
+ if (hip04_cpu_table[cluster][cpu]) {
+ ret = -EBUSY;
+ goto err;
+ }
+ cpu_relax();
+ data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster));
+ if (data & CORE_WFI_STATUS(cpu))
+ break;
+ spin_unlock_irq(&boot_lock);
+ /* Wait for clean L2 when the whole cluster is down. */
+ msleep(POLL_MSEC);
+ spin_lock_irq(&boot_lock);
+ }
+ if (tries >= count)
+ goto err;
+ data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \
+ CORE_DEBUG_RESET_BIT(cpu);
+ writel_relaxed(data, sysctrl + SC_CPU_RESET_REQ(cluster));
+ for (tries = 0; tries < count; tries++) {
+ cpu_relax();
+ data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster));
+ if (data & CORE_RESET_STATUS(cpu))
+ break;
+ }
+ if (tries >= count)
+ goto err;
+ spin_unlock_irq(&boot_lock);
+ return 0;
+err:
+ spin_unlock_irq(&boot_lock);
+ return ret;
+}
+
+static void hip04_mcpm_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ spin_lock(&boot_lock);
+ if (!hip04_cpu_table[cluster][cpu])
+ hip04_cpu_table[cluster][cpu] = 1;
+ spin_unlock(&boot_lock);
+}
+
+static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level)
+{
+ asm volatile (" \n"
+" cmp r0, #0 \n"
+" bxeq lr \n"
+ /* calculate fabric phys address */
+" adr r2, 2f \n"
+" ldmia r2, {r1, r3} \n"
+" sub r0, r2, r1 \n"
+" ldr r2, [r0, r3] \n"
+ /* get cluster id from MPIDR */
+" mrc p15, 0, r0, c0, c0, 5 \n"
+" ubfx r1, r0, #8, #8 \n"
+ /* 1 << cluster id */
+" mov r0, #1 \n"
+" mov r3, r0, lsl r1 \n"
+" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n"
+" tst r0, r3 \n"
+" bxne lr \n"
+" orr r1, r0, r3 \n"
+" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n"
+"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n"
+" tst r0, r3 \n"
+" beq 1b \n"
+" bx lr \n"
+
+" .align 2 \n"
+"2: .word . \n"
+" .word fabric_phys_addr \n"
+ );
+}
+
+static const struct mcpm_platform_ops hip04_mcpm_ops = {
+ .power_up = hip04_mcpm_power_up,
+ .power_down = hip04_mcpm_power_down,
+ .wait_for_powerdown = hip04_mcpm_wait_for_powerdown,
+ .powered_up = hip04_mcpm_powered_up,
+};
+
+static bool __init hip04_cpu_table_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ if (cluster >= HIP04_MAX_CLUSTERS ||
+ cpu >= HIP04_MAX_CPUS_PER_CLUSTER) {
+ pr_err("%s: boot CPU is out of bound!\n", __func__);
+ return false;
+ }
+ hip04_set_snoop_filter(cluster, 1);
+ hip04_cpu_table[cluster][cpu] = 1;
+ return true;
+}
+
+static int __init hip04_mcpm_init(void)
+{
+ struct device_node *np, *np_sctl, *np_fab;
+ struct resource fab_res;
+ void __iomem *relocation;
+ int ret = -ENODEV;
+
+ np = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-bootwrapper");
+ if (!np)
+ goto err;
+ ret = of_property_read_u32_array(np, "boot-method",
+ &hip04_boot_method[0], 4);
+ if (ret)
+ goto err;
+ np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
+ if (!np_sctl)
+ goto err;
+ np_fab = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-fabric");
+ if (!np_fab)
+ goto err;
+
+ ret = memblock_reserve(hip04_boot_method[0], hip04_boot_method[1]);
+ if (ret)
+ goto err;
+
+ relocation = ioremap(hip04_boot_method[2], hip04_boot_method[3]);
+ if (!relocation) {
+ pr_err("failed to map relocation space\n");
+ ret = -ENOMEM;
+ goto err_reloc;
+ }
+ sysctrl = of_iomap(np_sctl, 0);
+ if (!sysctrl) {
+ pr_err("failed to get sysctrl base\n");
+ ret = -ENOMEM;
+ goto err_sysctrl;
+ }
+ ret = of_address_to_resource(np_fab, 0, &fab_res);
+ if (ret) {
+ pr_err("failed to get fabric base phys\n");
+ goto err_fabric;
+ }
+ fabric_phys_addr = fab_res.start;
+ sync_cache_w(&fabric_phys_addr);
+ fabric = of_iomap(np_fab, 0);
+ if (!fabric) {
+ pr_err("failed to get fabric base\n");
+ ret = -ENOMEM;
+ goto err_fabric;
+ }
+
+ if (!hip04_cpu_table_init()) {
+ ret = -EINVAL;
+ goto err_table;
+ }
+ ret = mcpm_platform_register(&hip04_mcpm_ops);
+ if (ret) {
+ goto err_table;
+ }
+
+ /*
+ * Fill the instruction address that is used after secondary core
+ * out of reset.
+ */
+ writel_relaxed(hip04_boot_method[0], relocation);
+ writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */
+ writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8);
+ writel_relaxed(0, relocation + 12);
+ iounmap(relocation);
+
+ mcpm_sync_init(hip04_mcpm_power_up_setup);
+ mcpm_smp_set_ops();
+ pr_info("HiP04 MCPM initialized\n");
+ return ret;
+err_table:
+ iounmap(fabric);
+err_fabric:
+ iounmap(sysctrl);
+err_sysctrl:
+ iounmap(relocation);
+err_reloc:
+ memblock_free(hip04_boot_method[0], hip04_boot_method[1]);
+err:
+ return ret;
+}
+early_initcall(hip04_mcpm_init);
--
1.9.1
More information about the linux-arm-kernel
mailing list