[PATCH 1/2] ARM: tegra: add Acer Chromebook 13 device tree

Stephen Warren swarren at wwwdotorg.org
Wed Aug 13 10:31:25 PDT 2014


On 08/13/2014 11:23 AM, Olof Johansson wrote:
> On Wed, Aug 13, 2014 at 10:10 AM, Stephen Warren <swarren at wwwdotorg.org> wrote:
>> On 08/12/2014 07:56 PM, Dylan Reid wrote:
>>>
>>> The Acer Chromebook 13, codenamed "Big", contains an NVIDIA tegra124
>>> processor and is similar to the Venice2 reference platform.
>>>
>>> The keyboard, USB 2, audio, HDMI, sdcard and emmc have been tested
>>> and work on the 1366x768 models.  I haven't tried on the HD systems
>>> yet.
>>>
>>> WiFi does not yet work, it needs at least some PMIC changes to enable
>>> the 32k clock.
>>>
>>> The elan trackpad is not yet functional but hopefully will be soon as
>>> there are patches under review.
>>>
>>> There is also an issue on reboot because the TPM isn't reset.  It will
>>> cause the stock firmware to enter recovery mode.  This can be worked
>>> around by an EC-reset, press refresh and power at the same time.
>>
>>
>>> diff --git a/arch/arm/boot/dts/tegra124-big.dts
>>> b/arch/arm/boot/dts/tegra124-big.dts
>>
>>
>> I think we need to include the SKU name in the filename and compatible value
>> below, or at least plan out that for other SKUs, we'll add the SKU name on.
>>
>>
>>> +/ {
>>> +       model = "Google Big";
>>> +       compatible = "google,nyan-big", "nvidia,tegra124";
>>
>>
>> I think it'd be more user-friendly if the filename and compatible value more
>> obviously tied to the end-user-visible product name.
>
> We didn't prefix the reference platform on the very first one we
> shipped (snow), but for the peach platforms we used peach-pit and
> peach-pi. Those had different SoCs inside (albeit very similar ones),
> so there was a reason for separate DTS files.
>
> Here, we should probably prefix with nyan (so tegra124-nyan-big.dts).
> Users have shown themselves to be quite happy to use the internal
> names, they also tend to be less confusing (since we can't rely on the
> vendor to rename the product when the internals change, so we would
> need a separate namespace anyway).

I can see that the vendor might change the internals without changing 
the product name. That kind of thing happens too frequently across all 
kinds of products. So, there are certainly disadvantages using consumer 
marketing names here.

Presumably though the name "big" would no longer apply to any modified 
HW? Hence, I can't understand the need to say "nyan-big" rather than 
just "big". Is "nyan-" really needed to fully qualify the name? Also, 
the board isn't a Nyan, albeit the design may have been strongly derived 
from the reference board named Nyan.

> What we did on pit/pi was to add a more-specific revision of the
> hardware in front. That was more about dealing with various
> generations of the hardware though (as components sometimes change
> over the lifetime production). Here it's more about the basic
> SKU/feature set (panel size, touch screen). I suspect we'll do a
> big-touch.dts that just includes this and appends the TS device.
>
> For the panel sizes, do we need the specifics in the DT instead of via
> EDID? Do we really need to describe the exact panel in the DTS? Note
> that panels are pretty common to change over the production run of a
> product too, second sourcing, etc.
>
> Model could be changed to "Acer Chromebook 13", I suppose. In the past
> we've used "Google Peach Pit", "Google Snow". No user has complained
> yet about that.




More information about the linux-arm-kernel mailing list