[PATCH v5 4/7] mfd: Add hi6421 PMIC core driver
Guodong Xu
guodong.xu at linaro.org
Wed Aug 13 04:33:41 PDT 2014
This adds driver to support HiSilicon Hi6421 PMIC. Hi6421 includes multi-
functions, such as regulators, codec, ADCs, Coulomb counter, etc.
This driver includes core APIs _only_.
Drivers for individul components, like voltage regulators, are
implemented in corresponding driver directories and files.
Registers in Hi6421 are memory mapped, so using regmap-mmio API.
Signed-off-by: Guodong Xu <guodong.xu at linaro.org>
---
Documentation/devicetree/bindings/mfd/hi6421.txt | 37 +++++++
drivers/mfd/Kconfig | 13 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-pmic-core.c | 119 +++++++++++++++++++++++
include/linux/mfd/hi6421-pmic.h | 39 ++++++++
5 files changed, 209 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/hi6421.txt
create mode 100644 drivers/mfd/hi6421-pmic-core.c
create mode 100644 include/linux/mfd/hi6421-pmic.h
diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt
new file mode 100644
index 0000000..1512123
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
@@ -0,0 +1,37 @@
+* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
+
+Required parent device properties:
+- reg : register range space of hi6421;
+
+Supported Hi6421 sub-devices include:
+
+Device IRQ Names Supply Names Description
+------ --------- ------------ -----------
+regulators : : : Regulators
+
+Required child device properties:
+None.
+
+Example:
+ pmic: pmic at c00000 {
+ compatible = "hisilicon,hi6421-pmic";
+ reg = <0xc00000 0x0180>; /* 0x60 << 2 */
+
+ regulators {
+ // supply for MLC NAND/ eMMC
+ hi6421_vout0_reg: hi6421_vout0 {
+ regulator-name = "VOUT0";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ // supply for 26M Oscillator
+ hi6421_vout1_reg: hi6421_vout1 {
+ regulator-name = "VOUT1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6cc4b6a..f25ae4e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -209,6 +209,19 @@ config MFD_MC13XXX_I2C
help
Select this if your MC13xxx is connected via an I2C bus.
+config MFD_HI6421_PMIC
+ tristate "HiSilicon Hi6421 PMU/Codec IC"
+ depends on OF
+ select MFD_CORE
+ select REGMAP_MMIO
+ help
+ This driver supports HiSilicon Hi6421 PMIC. Hi6421 includes multi-
+ functions, such as regulators, codec, ADCs, Coulomb counter, etc.
+ This driver includes core APIs _only_. You have to select
+ individul components like voltage regulators under corresponding
+ menus in order to enable them.
+ Memory-mapped I/O is the way to communicate with Hi6421.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8afedba..4c52a6a6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -169,3 +169,4 @@ obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
+obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c
new file mode 100644
index 0000000..bd4935b
--- /dev/null
+++ b/drivers/mfd/hi6421-pmic-core.c
@@ -0,0 +1,119 @@
+/*
+ * Device driver for Hi6421 IC
+ *
+ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ * Copyright (c) <2013-2014> Linaro Ltd.
+ * http://www.linaro.org
+ *
+ * Author: Guodong Xu <guodong.xu at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/hi6421-pmic.h>
+
+static struct of_device_id of_hi6421_pmic_match_tbl[] = {
+ {
+ .compatible = "hisilicon,hi6421-pmic",
+ },
+ { /* end */ }
+};
+
+static const struct mfd_cell hi6421_devs[] = {
+ {
+ .name = "hi6421-regulator",
+ },
+};
+
+static struct regmap_config hi6421_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 8,
+ .max_register = HI6421_REG_TO_BUS_ADDR(0xFF),
+};
+
+static int hi6421_pmic_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hi6421_pmic *pmic = NULL;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+
+ pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic) {
+ dev_err(dev, "cannot allocate hi6421_pmic device info\n");
+ return -ENOMEM;
+ }
+
+ /* get resources */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "Invalid mem resource.\n");
+ return -ENODEV;
+ }
+
+ base = devm_request_and_ioremap(dev, res);
+ if (!base) {
+ dev_err(dev, "cannot map register memory\n");
+ return -ENOMEM;
+ }
+
+ pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+ &hi6421_regmap_config);
+ if (IS_ERR(pmic->regmap)) {
+ dev_err(&pdev->dev, "regmap init failed: %ld\n",
+ PTR_ERR(pmic->regmap));
+ return PTR_ERR(pmic->regmap);
+ }
+
+ pmic->dev = dev;
+ platform_set_drvdata(pdev, pmic);
+
+ /* set over-current protection debounce 8ms*/
+ regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
+ (HI6421_OCP_DEB_SEL_MASK | HI6421_OCP_EN_DEBOUNCE_MASK |
+ HI6421_OCP_AUTO_STOP_MASK),
+ (HI6421_OCP_DEB_SEL_8MS | HI6421_OCP_EN_DEBOUNCE_ENABLE));
+
+ ret = mfd_add_devices(dev, 0, hi6421_devs,
+ ARRAY_SIZE(hi6421_devs), NULL, 0, NULL);
+
+ return ret;
+}
+
+static int hi6421_pmic_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver hi6421_pmic_driver = {
+ .driver = {
+ .name = "hi6421_pmic",
+ .owner = THIS_MODULE,
+ .of_match_table = of_hi6421_pmic_match_tbl,
+ },
+ .probe = hi6421_pmic_probe,
+ .remove = hi6421_pmic_remove,
+};
+module_platform_driver(hi6421_pmic_driver);
+
+MODULE_AUTHOR("Guodong Xu <guodong.xu at linaro.org>");
+MODULE_DESCRIPTION("Hi6421 PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/hi6421-pmic.h b/include/linux/mfd/hi6421-pmic.h
new file mode 100644
index 0000000..36bcb34
--- /dev/null
+++ b/include/linux/mfd/hi6421-pmic.h
@@ -0,0 +1,39 @@
+/*
+ * Header file for device driver Hi6421 PMIC
+ *
+ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ * Copyright (c) <2013-2014> Linaro Ltd.
+ * http://www.linaro.org
+ *
+ * Author: Guodong Xu <guodong.xu at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __HI6421_PMIC_H
+#define __HI6421_PMIC_H
+
+/* Hi6421 registers are mapped to memory bus in 4 bytes stride */
+#define HI6421_REG_TO_BUS_ADDR(x) (x << 2)
+
+/* Hi6421 OCP (over current protection) and DEB (debounce) control register */
+#define HI6421_OCP_DEB_CTRL_REG HI6421_REG_TO_BUS_ADDR(0x51)
+#define HI6421_OCP_DEB_SEL_MASK (0x0C)
+#define HI6421_OCP_DEB_SEL_8MS (0x00)
+#define HI6421_OCP_DEB_SEL_16MS (0x04)
+#define HI6421_OCP_DEB_SEL_32MS (0x08)
+#define HI6421_OCP_DEB_SEL_64MS (0x0C)
+#define HI6421_OCP_EN_DEBOUNCE_MASK (0x02)
+#define HI6421_OCP_EN_DEBOUNCE_ENABLE (0x02)
+#define HI6421_OCP_AUTO_STOP_MASK (0x01)
+#define HI6421_OCP_AUTO_STOP_ENABLE (0x01)
+
+struct hi6421_pmic {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#endif /* __HI6421_PMIC_H */
--
1.9.1
More information about the linux-arm-kernel
mailing list