Freescale: iMX6Q Sabre SD

[John Tobias]

Hi Fabio,

After applying the patches, it works...

Regards,

john

On Tue, Aug 12, 2014 at 8:10 AM, John Tobias <john.tobias.ph at gmail.com> wrote:
> Hi Fabio,
>
> Thanks for the info. I will check it.
>
> Regards,
>
> john
>
> On Tue, Aug 12, 2014 at 6:42 AM, Fabio Estevam <festevam at gmail.com> wrote:
>> John,
>>
>> On Mon, Aug 11, 2014 at 10:31 AM, Fabio Estevam <festevam at gmail.com> wrote:
>>
>>> I tested on my mx6qsabresd revC4 / rev C and the PCI link is not
>>> detected just like you described.
>>
>> Tested again today and my rev C4 detects the PCI card in U-boot and in
>> the kernel.
>>
>> For U-boot I use top of tree u-boot-imx.
>>
>> For kernel I am using linux-next 20140811 plus two patches:
>>
>> 1. One patch from Lucas that allows the kernel to boot when the
>> bootloader has already configured PCI:
>>
>> http://thread.gmane.org/gmane.linux.kernel.pci/33712/focus=33711
>>
>> 2. A patch from Tim that fix occasional PCI linkup failures:
>>
>> http://www.spinics.net/lists/linux-pci/msg33520.html
>>
>> Let me know if using this kernel version allows your PCI card to be
>> detected on revC4 mx6qsabresd board.