[PATCH 2/2] ARM: dts: ODROID i2c improvements

[Tomeu Vizoso]

Tested on an Odroid-U2:

Tested-by: Tomeu Vizoso <tomeu.vizoso at collabora.com>

Thanks,

Tomeu

On 16 July 2014 10:50, Daniel Drake <drake at endlessm.com> wrote:
> Increase max i2c bus frequency beyond the default for faster
> data transfers. According to the manual, these faster speeds are
> only available when the board is wired up the right way. In this case,
> the vendor kernel has run at this speed for a long time.
>
> sda-delay is needed for talking to RTC on PMIC, otherwise the i2c
> controller never sees an ACK. Strangely the other PMIC i2c slave (the
> main one) works fine even without this delay. I Chose value 100 to
> match the vendor kernel.
>
> Signed-off-by: Daniel Drake <drake at endlessm.com>
> ---
>  arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index cb6f55f..adadaf9 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -134,6 +134,8 @@
>         i2c at 13860000 {
>                 pinctrl-0 = <&i2c0_bus>;
>                 pinctrl-names = "default";
> +               samsung,i2c-sda-delay = <100>;
> +               samsung,i2c-max-bus-freq = <400000>;
>                 status = "okay";
>
>                 usb3503: usb3503 at 08 {
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel