[PATCH v2 6/6] ARM: mvebu: Add proper pin muxing on Armada 370 RD board
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Mon Aug 11 05:14:41 PDT 2014
This commit adds the required pin muxing for the network interfaces and
the MDIO interface to be properly initialized. For instance, this makes
it possible for a bootloader to initialize and access the network interfaces
Only the second network interface is pin muxed. The first network interface is
connected to the PHY using SGMII, which uses a dedicated SerDes lane.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
arch/arm/boot/dts/armada-370-rd.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 4169f40..ca13d9c 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -59,6 +59,8 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy at 0 {
reg = <0>;
};
@@ -74,6 +76,8 @@
phy-mode = "sgmii";
};
ethernet at 74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
--
2.0.1
More information about the linux-arm-kernel
mailing list