[PATCH 4/6] ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Fri Aug 8 08:18:54 PDT 2014
This commit adds the required pin muxing for the network interfaces and
the MDIO interface to be properly initialized. For instance, this makes
it possible for a bootloader to initialize and access the network interfaces
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index d6d572e..4b793da 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -101,12 +101,16 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
reg = <0>;
};
};
ethernet at 74000 {
+ pinctrl-0 = <&ge1_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
--
2.0.1
More information about the linux-arm-kernel
mailing list