[PATCH v5 0/4] Patches to add support for Rockchip dwc2 controller

[Kever Yang]

These patches to add support for dwc2 controller found in
Rockchip processors rk3066, rk3188 and rk3288,
and enable dts for rk3288 evb.

Changes in v5:
- max_transfer_size change to 65535 to met the requirement of
  header file
- change the sort order of dwc2 in rk3288.dtsi
- don't enable otg port for evb

Changes in v4:
- max_transfer_size change to 65536, this should be enough
  for most transfer, the hardware auto-detect will set this
  to 0x7ffff which may make dma_alloc_coherent fail when
  non-dword aligned buf from driver like usbnet happen.
- remove EHCI and HSIC dts patch for Doug had post it seprately.

Changes in v3:
- EHCI and HSIC move new for version 3.
- Rebase

Changes in v2:
- Split out dr_mode and rk3288 bindings.
- add compatible "snps,dwc2" bingding info
- set most parameters as driver auto-detect
- evb patch added in version 2

Kever Yang (4):
  Documentation: dt-bindings: add dt binding info for Rockchip dwc2
  usb: dwc2: add compatible data for rockchip soc
  ARM: dts: add rk3288 dwc2 controller support
  ARM: dts: Enable USB host1(dwc) on rk3288-evb

 Documentation/devicetree/bindings/usb/dwc2.txt |  3 +++
 arch/arm/boot/dts/rk3288-evb.dtsi              |  4 ++++
 arch/arm/boot/dts/rk3288.dtsi                  | 20 ++++++++++++++++++
 drivers/usb/dwc2/platform.c                    | 29 ++++++++++++++++++++++++++
 4 files changed, 56 insertions(+)

-- 
1.9.1