[PATCH 4/9] clk: sunxi: PLL2 support for sun4i, sun5i and sun7i
jonsmirl at gmail.com
jonsmirl at gmail.com
Thu Aug 7 17:03:47 PDT 2014
On Wed, Aug 6, 2014 at 11:20 AM, jonsmirl at gmail.com <jonsmirl at gmail.com> wrote:
> On Thu, Jul 31, 2014 at 5:28 PM, Emilio López <emilio at elopez.com.ar> wrote:
>> This patch adds support for PLL2 and derivates on sun4i, sun5i and
>> sun7i SoCs. As this PLL is only used for audio and requires good
>> accuracy, we only support two known good rates.
>>
>> Signed-off-by: Emilio López <emilio at elopez.com.ar>
>> ---
>>
>> Changes from RFC:
>> * Add support for A10 rev. A
>> * Document compatibles
>> * Use fixed factors
>>
>> Documentation/devicetree/bindings/clock/sunxi.txt | 2 +
>> drivers/clk/sunxi/Makefile | 1 +
>> drivers/clk/sunxi/clk-a10-pll2.c | 243 ++++++++++++++++++++++
>> 3 files changed, 246 insertions(+)
>> create mode 100644 drivers/clk/sunxi/clk-a10-pll2.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
>> index d3a5c3c..41ada31 100644
>> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
>> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
>> @@ -10,6 +10,8 @@ Required properties:
>> "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
>> "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
>> "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
>> + "allwinner,sun4i-a10-a-pll2-clk" - for the PLL2 clock on A10 rev. A
>> + "allwinner,sun4i-a10-b-pll2-clk" - for the PLL2 clock on A10 rev. B
>> "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
>> "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
>> "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
>> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
>> index 6850cba..dcd5709 100644
>> --- a/drivers/clk/sunxi/Makefile
>> +++ b/drivers/clk/sunxi/Makefile
>> @@ -4,6 +4,7 @@
>>
>> obj-y += clk-sunxi.o clk-factors.o
>> obj-y += clk-a10-hosc.o
>> +obj-y += clk-a10-pll2.o
>> obj-y += clk-a20-gmac.o
>>
>> obj-$(CONFIG_MFD_SUN6I_PRCM) += \
>> diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
>> new file mode 100644
>> index 0000000..bcf7d0b
>> --- /dev/null
>> +++ b/drivers/clk/sunxi/clk-a10-pll2.c
>> @@ -0,0 +1,243 @@
>> +/*
>> + * Copyright 2014 Emilio López
>> + *
>> + * Emilio López <emilio at elopez.com.ar>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/slab.h>
>> +
>> +#define SUN4I_PLL2_ENABLE 31
>> +#define SUN4I_PLL2_A_VCOBIAS 0
>> +#define SUN4I_PLL2_A_VCOBIAS_MASK 0x1F
>> +#define SUN4I_PLL2_A_N 7
>> +#define SUN4I_PLL2_A_N_MASK 0x7F
>> +#define SUN4I_PLL2_B_POST_DIV 26
>> +#define SUN4I_PLL2_B_POST_DIV_MASK 0xF
>> +#define SUN4I_PLL2_B_N 8
>> +#define SUN4I_PLL2_B_N_MASK 0x7F
>> +#define SUN4I_PLL2_B_PRE_DIV 0
>> +#define SUN4I_PLL2_B_PRE_DIV_MASK 0x1F
>> +
>> +#define SUN4I_PLL2_OUTPUTS 4
>> +
>> +struct sun4i_pll2_clk {
>> + struct clk_hw hw;
>> + void __iomem *reg;
>> +};
>> +
>> +static inline struct sun4i_pll2_clk *to_sun4i_pll2_clk(struct clk_hw *hw)
>> +{
>> + return container_of(hw, struct sun4i_pll2_clk, hw);
>> +}
>> +
>> +static unsigned long sun4i_pll2_recalc_rate_a(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw);
>> + int vcobias, n;
>> + u32 val;
>> +
>> + val = readl(clk->reg);
>> + vcobias = (val >> SUN4I_PLL2_A_VCOBIAS) & SUN4I_PLL2_A_VCOBIAS_MASK;
>> + n = (val >> SUN4I_PLL2_A_N) & SUN4I_PLL2_A_N_MASK;
>> +
>> + if (vcobias == 10 && n == 94)
>> + return 22579200;
>> + else if (vcobias == 9 && n == 83)
>> + return 24576000;
>> +
>> + /*
>> + * Unfortunately we don't really have much documentation on how
>> + * these factors relate mathematically
>> + */
>> + return 0;
>> +}
>> +
>> +static unsigned long sun4i_pll2_recalc_rate_b(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw);
>> + int n, prediv, postdiv;
>> + u32 val;
>> +
>> + val = readl(clk->reg);
>> + n = (val >> SUN4I_PLL2_B_N) & SUN4I_PLL2_B_N_MASK;
>> + prediv = (val >> SUN4I_PLL2_B_PRE_DIV) & SUN4I_PLL2_B_PRE_DIV_MASK;
>> + postdiv = (val >> SUN4I_PLL2_B_POST_DIV) & SUN4I_PLL2_B_POST_DIV_MASK;
>> +
>> + /* 0 is a special case and means 1 */
>> + if (n == 0)
>> + n = 1;
>> + if (prediv == 0)
>> + prediv = 1;
>> + if (postdiv == 0)
>> + postdiv = 1;
>> +
>> + return ((parent_rate * n) / prediv) / postdiv;
>> +}
>> +
>> +static long sun4i_pll2_round_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long *parent_rate)
>> +{
>> + /*
>> + * There is only two interesting rates for the audio PLL, the
>> + * rest isn't really usable due to accuracy concerns. Therefore,
>> + * we specifically round to those rates here
>> + */
>> + if (rate < 22579200)
>> + return -EINVAL;
>> +
>> + if (rate >= 22579200 && rate < 24576000)
>> + return 22579200;
>> +
>> + return 24576000;
>> +}
>
> These should return the actual computed rate osc*n / (pre * post) so
> that the error column is displayed correctly.
>
> pll2 1 1 22571428 0
> i2s0 1 1 22571428 0
> mclk0 0 0 22571428 0
>
> At 22.5 the error is 0.03%, 24.5 error is 0.01%.
>
> So when you ask for 24.576 it returns 24.571428 and 22.5792 returns 22.571428.
>
>
This is more complicated that it looks. If you set 22.5792Mhz and the
clock doesn't return 22.5792Mhz it throws off the math inside of
ALSA. For example 22579200 / 44100 = 512fs. But if you use 22571428 /
44100 = 511.8 = 511 because of truncation. Now the checks looking for
512 don't trigger. I just hit this bug.
So I think the clock is doing the right thing when you set 22.5792Mhz
and it returns the actual number 22.571428Mhz.
It's the ALSA code that needs to be more tolerant and use some round()
functions to allow for a slight error in these frequencies.
>
>
>> +
>> +static int sun4i_pll2_set_rate_a(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw);
>> + u32 val = readl(clk->reg);
>> +
>> + val &= ~(SUN4I_PLL2_A_VCOBIAS_MASK << SUN4I_PLL2_A_VCOBIAS);
>> + val &= ~(SUN4I_PLL2_A_N_MASK << SUN4I_PLL2_A_N);
>> +
>> + if (rate == 22579200)
>> + val |= (10 << SUN4I_PLL2_A_VCOBIAS) | (94 << SUN4I_PLL2_A_N);
>> + else if (rate == 24576000)
>> + val |= (9 << SUN4I_PLL2_A_VCOBIAS) | (83 << SUN4I_PLL2_A_N);
>> + else
>> + return -EINVAL;
>> +
>> + writel(val, clk->reg);
>> +
>> + return 0;
>> +}
>> +
>> +static int sun4i_pll2_set_rate_b(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw);
>> + u32 val = readl(clk->reg);
>> +
>> + val &= ~(SUN4I_PLL2_B_N_MASK << SUN4I_PLL2_B_N);
>> + val &= ~(SUN4I_PLL2_B_PRE_DIV_MASK << SUN4I_PLL2_B_PRE_DIV);
>> + val &= ~(SUN4I_PLL2_B_POST_DIV_MASK << SUN4I_PLL2_B_POST_DIV);
>> +
>> + val |= (21 << SUN4I_PLL2_B_PRE_DIV) | (4 << SUN4I_PLL2_B_POST_DIV);
>> +
>> + if (rate == 22579200)
>> + val |= (79 << SUN4I_PLL2_B_N);
>> + else if (rate == 24576000)
>> + val |= (86 << SUN4I_PLL2_B_N);
>> + else
>> + return -EINVAL;
>> +
>> + writel(val, clk->reg);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct clk_ops sun4i_pll2_ops_a = {
>> + .recalc_rate = sun4i_pll2_recalc_rate_a,
>> + .round_rate = sun4i_pll2_round_rate,
>> + .set_rate = sun4i_pll2_set_rate_a,
>> +};
>> +
>> +
>> +static const struct clk_ops sun4i_pll2_ops_b = {
>> + .recalc_rate = sun4i_pll2_recalc_rate_b,
>> + .round_rate = sun4i_pll2_round_rate,
>> + .set_rate = sun4i_pll2_set_rate_b,
>> +};
>> +
>> +static const struct of_device_id pll2_matches[] __initconst = {
>> + { .compatible = "allwinner,sun4i-a10-a-pll2-clk", .data = &sun4i_pll2_ops_a },
>> + { .compatible = "allwinner,sun4i-a10-b-pll2-clk", .data = &sun4i_pll2_ops_b },
>> + { /* sentinel */ },
>> +};
>> +
>> +static void __init sun4i_pll2_setup(struct device_node *np)
>> +{
>> + const char *clk_name = np->name, *parent;
>> + const struct of_device_id *match;
>> + struct clk_onecell_data *clk_data;
>> + const struct clk_ops *pll2_ops;
>> + struct sun4i_pll2_clk *pll2;
>> + struct clk_gate *gate;
>> + struct clk **clks;
>> + void __iomem *reg;
>> +
>> + /* Choose the correct ops for pll2 */
>> + match = of_match_node(pll2_matches, np);
>> + pll2_ops = match->data;
>> +
>> + pll2 = kzalloc(sizeof(*pll2), GFP_KERNEL);
>> + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
>> + clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
>> + clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(*clks), GFP_KERNEL);
>> + if (!pll2 || !gate || !clk_data || !clks)
>> + goto free_mem;
>> +
>> + reg = of_iomap(np, 0);
>> + parent = of_clk_get_parent_name(np, 0);
>> + of_property_read_string_index(np, "clock-output-names", 0, &clk_name);
>> +
>> + pll2->reg = reg;
>> + gate->reg = reg;
>> + gate->bit_idx = SUN4I_PLL2_ENABLE;
>> +
>> + /* PLL2, also known as PLL2x1 */
>> + of_property_read_string_index(np, "clock-output-names", 0, &clk_name);
>> + clks[0] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL,
>> + &pll2->hw, pll2_ops,
>> + &gate->hw, &clk_gate_ops, 0);
>> + WARN_ON(IS_ERR(clks[0]));
>> + clk_set_rate(clks[0], 22579200);
>> + parent = clk_name;
>> +
>> + /* PLL2x2, 1/4 the rate of PLL2x8 */
>> + of_property_read_string_index(np, "clock-output-names", 1, &clk_name);
>> + clks[1] = clk_register_fixed_factor(NULL, clk_name, parent,
>> + CLK_SET_RATE_PARENT, 2, 1);
>> + WARN_ON(IS_ERR(clks[1]));
>> +
>> + /* PLL2x4, 1/2 the rate of PLL2x8 */
>> + of_property_read_string_index(np, "clock-output-names", 2, &clk_name);
>> + clks[2] = clk_register_fixed_factor(NULL, clk_name, parent,
>> + CLK_SET_RATE_PARENT, 4, 1);
>> + WARN_ON(IS_ERR(clks[2]));
>> +
>> + /* PLL2x8, double of PLL2 without the post divisor */
>> + of_property_read_string_index(np, "clock-output-names", 3, &clk_name);
>> + clks[3] = clk_register_fixed_factor(NULL, clk_name, parent,
>> + CLK_SET_RATE_PARENT, 2 * 4, 1);
>> + WARN_ON(IS_ERR(clks[3]));
>> +
>> + clk_data->clks = clks;
>> + clk_data->clk_num = SUN4I_PLL2_OUTPUTS;
>> + of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
>> +
>> + return;
>> +
>> +free_mem:
>> + kfree(pll2);
>> + kfree(gate);
>> + kfree(clk_data);
>> + kfree(clks);
>> +}
>> +CLK_OF_DECLARE(sun4i_pll2_a, "allwinner,sun4i-a10-a-pll2-clk", sun4i_pll2_setup);
>> +CLK_OF_DECLARE(sun4i_pll2_b, "allwinner,sun4i-a10-b-pll2-clk", sun4i_pll2_setup);
>> --
>> 2.0.3
>
>
>
> --
> Jon Smirl
> jonsmirl at gmail.com
--
Jon Smirl
jonsmirl at gmail.com
More information about the linux-arm-kernel
mailing list