[PATCH v6 2/2] dt-bindings: document Rockchip saradc

[Jonathan Cameron]

On 23/07/14 22:24, Heiko Stübner wrote:
> This add the necessary binding documentation for the saradc found in all recent
> processors from Rockchip.
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Applied to the togreg branch of iio.git.
I have exercised a small amount of discretion wrt to the standard 3 weeks
as there really is very little different in here from previous versions
and no one has raised any comments on them.

It's nearly 3 weeks anyway!

J
> ---
> changes since v5:
> - remove clock-frquency property as described in patch 1/2
> 
>  .../bindings/iio/adc/rockchip-saradc.txt           | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
> new file mode 100644
> index 0000000..5d3ec1d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
> @@ -0,0 +1,24 @@
> +Rockchip Successive Approximation Register (SAR) A/D Converter bindings
> +
> +Required properties:
> +- compatible: Should be "rockchip,saradc"
> +- reg: physical base address of the controller and length of memory mapped
> +       region.
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> +              depends on the interrupt controller.
> +- clocks: Must contain an entry for each entry in clock-names.
> +- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
> +               the peripheral clock.
> +- vref-supply: The regulator supply ADC reference voltage.
> +- #io-channel-cells: Should be 1, see ../iio-bindings.txt
> +
> +Example:
> +	saradc: saradc at 2006c000 {
> +		compatible = "rockchip,saradc";
> +		reg = <0x2006c000 0x100>;
> +		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
> +		clock-names = "saradc", "apb_pclk";
> +		#io-channel-cells = <1>;
> +		vref-supply = <&vcc18>;
> +	};
>