[PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb
jh80.chung at samsung.com
Thu Aug 7 01:24:37 PDT 2014
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
On 08/07/2014 02:09 AM, Doug Anderson wrote:
> This series adds basic eMMC and SD card support for the rk3288-evb
> board based on Addy's posted dw_mmc patch from:
> The series is a little tricky because:
> * Jaehoon has some outstanding patches to remove the slot node. Since
> those haven't landed yet, I've posted my original patch with the
> slot node and then some future patches that can land with Jaehoon's
> So just to be explicit:
> - Patch #1 and #2 can land after Addy's patch lands.
> - Patch #3 and #4 can land after Jaehoon's patch lands, though there's
> no huge hurry since Jaehoon's patch supports the old mode (it just
> prints a warning).
> Note that we don't have regulators specified yet (no regulator driver
> for rk808-based board). We also don't yet support UHS modes or MMC
> DDR50 (which require regulator support plus dw_mmc driver support for
> tuning). Those features can come later.
> Changes in v3:
> - Removed DDR50 mode since it needs tuning, which isn't there yet.
> Changes in v2:
> - New patchwork link for Addy's patch
> - Squashed in the DDR50 mode since Addy spun his patch.
> - Refer to the new title of Jaehoon's patch
> Doug Anderson (4):
> ARM: dts: Add emmc and sdmmc to the rk3288 device tree
> ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
> ARM: dts: Take the mmc slot node out of rk3288-evb
> ARM: dts: mmc slot node gone on rk3288 => no more address / size cells
> arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++
> 2 files changed, 42 insertions(+)
More information about the linux-arm-kernel