[PATCH] ARM: mx6: Fix suspend/resume with PCI

[Fabio Estevam]

On Thu, Aug 7, 2014 at 12:08 AM, Shawn Guo <shawn.guo at freescale.com> wrote:
> On Wed, Aug 06, 2014 at 11:52:29PM -0300, Fabio Estevam wrote:
>> On Wed, Aug 6, 2014 at 11:18 PM, Shawn Guo <shawn.guo at freescale.com> wrote:
>>
>> > I intend to agree with Lucas that we should align our testing and
>> > understanding on the issue before trying to fix it.
>> >
>> > Again, I do not see this issue on my TO1.2 chip, but only TO1.5,
>> > aka Rev 1.3, one.
>>
>> Which version is your sabresd with TO1.2? Mine is rev C2 and the
>> suspend/resume issue happens 100%.
>
> The label on the board says it's Rev B.

If I remember correctly you are testing suspend/resume with no PCI
card connected to the TO1.2 board, right?

I have just tried suspend/resume without any PCI card connect and it
does work fine.

Only when I have the PCI card connected I get the hang.