CPUIdle Armada 370

[Nicolas Derouineau]

Here is our dts file.


________________________________________
De : Gregory CLEMENT <gregory.clement at free-electrons.com>
Envoyé : mercredi 6 août 2014 18:10
À : Nicolas Derouineau; linux-arm-kernel at lists.infradead.org
Cc : Thomas Petazzoni; Simon Boulay
Objet : Re: CPUIdle Armada 370

On 06/08/2014 18:01, Nicolas Derouineau wrote:
> Ok,
> So here is the log of the error(using the previous config file)>
>
> NAND read: device 0 offset 0x240000, size 0x600000
>  6291456 bytes read: OK
> ## Booting kernel from Legacy Image at 02000000 ...
>    Image Name:   Linux-3.16.0-next-20140805-dirty
>    Created:      2014-08-06  15:56:06 UTC
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    2939920 Bytes = 2.8 MiB
>    Load Address: 00080000
>    Entry Point:  00080000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 01000000
>    Booting using the fdt blob at 0x01000000
>    Loading Kernel Image ... OK
> OK
>    Loading Device Tree to 00ffa000, end 00fff8a6 ... OK
>
> Starting kernel ...
>
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 3.16.0-next-20140805-dirty (nde at nde-OptiPlex-980) (gcc version 4.6.4 (Linaro GCC branch-4.6.4. Marvell GCC release 201308-2123.0cc69bb4 64K MAXPAGESIZE ALIGN) ) #13 Wed Aug 6 14
> [    0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
> [    0.000000] Machine model: Vitec VMR-1404 (Marvell Armada 370 based)
So this your own board with your own dts I guess. Would it possible to share it to see
if a mistake could have slip there?

[...]

> [    0.073922] mvebu-soc-id: MVEBU SoC ID=0x6707, Rev=0x1

Interesting you use a different variant the 88F6707 whereas we only test
this driver on the 88F6710. Maybe there is something there.


Thanks,

Gregory

> ________________________________________
> De : Gregory CLEMENT <gregory.clement at free-electrons.com>
> Envoyé : mercredi 6 août 2014 17:43
> À : Nicolas Derouineau; linux-arm-kernel at lists.infradead.org
> Cc : Thomas Petazzoni; Simon Boulay
> Objet : Re: CPUIdle Armada 370
>
> Hi Nicolas,
>
> [..]
>
>>> On 06/08/2014 16:01, Nicolas Derouineau wrote:
>>>> Hello,
>>>> I am currently trying to use the CPUIdle driver provided by linux-next (or by the patch here https://github.com/MISL-EBU-System-SW/mainline-public/commits/3.16/cpuidle-v3).
>>>
>>> I have just tested using next-20140806 and mvebu_v7_defconfig.
>>> And it worked well on a mirabox using the Armada 370 SoC.
>>>
>>>>
>>>> Everything runs fine as long as I don't select the CPU driver for the ARMADA Family. When I do, at boottime, the program is entering the __cpu_suspend save function and then get lost in it and that turns into a kernel panic. I have already made a post about this on the ARM Community Forum (http://community.arm.com/thread/6326).
>>>>
>>>> The "faulty" configuration file is attached to this email.
>>>
>>> Now I will try with this configuration
>>
>> Using your configuration file I didn't reproduce your issue.
>> And according to the stat given by linux the kernel spent a lot
>> of time in idle:
>>
>> cat /sys/devices/system/cpu/cpu0/cpuidle/state1/time
>> 338822284
>>
>>
>> Could you try again with next-20140806?
>
> Also could you send your full boot log until the crash
> it may help us.
>
> Thanks,
>
> Gregory
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>


--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: armada-370-vmr1404.dts
Type: application/octet-stream
Size: 2569 bytes
Desc: armada-370-vmr1404.dts
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140806/8023abf4/attachment.obj>