[PATCH V2 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock

Shengjiu Wang shengjiu.wang at freescale.com
Wed Aug 6 01:35:15 PDT 2014


This patch mainly adds the clock route from external 24.576MHz OSC to internal
ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an
entirely synchronous clock source against CS42888.

[ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
  we would get noise during the audio playback via ESAI->CS42888 even though
  this generated clock's rate is equal to the external one statistically. It
  might be resulted from the tiny difference between two clock source, which
  might be crucial to the sensitive CODEC we use -- CS42888.

  2, Ideally, we should use bypass mode for pll4 since we only need to get
  the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
  supported. After bypass mode implement, then we can refine this patch.]

  Expected result:

  anaclk2                 0           1            24576000
   lvds2_in               0           1            24576000
    pll4_sel              0           1            24576000
     pll4_audio           0           1            786432000
      pll4_post_div       0           1            786432000
       pll4_audio_div     0           1            786432000
        esai_sel          0           1            786432000
         esai_pred        0           1            98304000
          esai_podf       0           1            24576000
           esai_extal     0           1            24576000

Signed-off-by: Nicolin Chen <Guangyu.Chen at freescale.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang at freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c  |    5 +++++
 arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 330aad3..29151cb 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -414,6 +414,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
 	clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL);
 
 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {
@@ -457,6 +461,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	/* Audio-related clocks configuration */
 	clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
+	clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
 
 	/* All existing boards with PCIe use LVDS1 */
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d51c6e9..ea24a96 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -362,6 +362,28 @@ put_node:
 	of_node_put(np);
 }
 
+#define ESAI_AUDIO_MCLK 24576000
+
+static void __init imx6q_audio_lvds2_init(void)
+{
+        struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal;
+
+        pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
+        pll4_sel = clk_get_sys(NULL, "pll4_sel");
+        lvds2_in = clk_get_sys(NULL, "lvds2_in");
+        esai_extal = clk_get_sys(NULL, "esai_extal");
+        if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
+            IS_ERR(lvds2_in) || IS_ERR(esai_extal))
+                return;
+
+        if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
+                return;
+
+        clk_set_parent(pll4_sel, lvds2_in);
+        clk_set_rate(pll4_audio_div, 786432000);
+        clk_set_rate(esai_extal, ESAI_AUDIO_MCLK);
+}
+
 static struct platform_device imx6q_cpufreq_pdev = {
 	.name = "imx6q-cpufreq",
 };
@@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
 		imx6q_opp_init();
 		platform_device_register(&imx6q_cpufreq_pdev);
 	}
+
+	if (of_machine_is_compatible("fsl,imx6q-sabreauto")
+		|| of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
+		imx6q_audio_lvds2_init();
+	}
+
 }
 
 static void __init imx6q_map_io(void)
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list