[RESEND PATCH v3 2/4] usb: musb: Bugfix of_node assignment

[Sebastian Andrzej Siewior]

On 08/04/2014 12:13 PM, Markus Pargmann wrote:

>> In the long term I would suggest to move the DT probe over to the musb
>> core code and we wouldn't need the node assignment anymore…
>>
>> [0] http://www.spinics.net/lists/linux-usb/msg94701.html
> 
> Really old thread but I just noticed that this solution does not work
> for automatically parsed properties like 'default' pinctrl. I added
> 'default' pinctrl settings for the musb device node. They are
> automatically setup by the driver core infrastracture as expected.
> 
> The problem is that the 'default' pincontrol settings will be applied
> again for the musb-hdrc because they are extracted from the of_ndoe
> data. This fails because they are already claimed by the 'musb-dsps'
> driver. musb-hdrc continues probing, but there is a big error message
> that it failed:
> 
> [    1.181912] pinctrl-single 44e10800.pinmux: pin 44e10a20.0 already requested by 47401c00.usb; cannot clai
> m for musb-hdrc.1.auto
> [    1.194053] pinctrl-single 44e10800.pinmux: pin-136 (musb-hdrc.1.auto) status -22
> [    1.201930] pinctrl-single 44e10800.pinmux: could not request pin 136 (44e10a20.0) from group pinmux_usb1
> _pins  on device pinctrl-single
> [    1.214790] musb-hdrc musb-hdrc.1.auto: Error applying setting, reverse things back
> 
> Any ideas how to solve it for mainline?

Just what I said last time and I hope Felipe has the same opinion:
Teach musb-hdrc DT. Which means "ti,musb-am33xx" would be listed for
for musb-hdrc itself and we would lose that child device. The
additional ops that we have would be passed via the data field next to
the id.

> Best regards,
> 
> Markus

Sebastian