[GIT PULL 40/51] arm64: KVM: rename pm_fake handler to trap_raz_wi

Christoffer Dall christoffer.dall at linaro.org
Mon Aug 4 01:46:57 PDT 2014


From: Marc Zyngier <marc.zyngier at arm.com>

pm_fake doesn't quite describe what the handler does (ignoring writes
and returning 0 for reads).

As we're about to use it (a lot) in a different context, rename it
with a (admitedly cryptic) name that make sense for all users.

Reviewed-by: Anup Patel <anup.patel at linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
 arch/arm64/kvm/sys_regs.c | 83 ++++++++++++++++++++++++-----------------------
 1 file changed, 43 insertions(+), 40 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 56288f3..492ba30 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -161,18 +161,9 @@ static bool access_sctlr(struct kvm_vcpu *vcpu,
 	return true;
 }
 
-/*
- * We could trap ID_DFR0 and tell the guest we don't support performance
- * monitoring.  Unfortunately the patch to make the kernel check ID_DFR0 was
- * NAKed, so it will read the PMCR anyway.
- *
- * Therefore we tell the guest we have 0 counters.  Unfortunately, we
- * must always support PMCCNTR (the cycle counter): we just RAZ/WI for
- * all PM registers, which doesn't crash the guest kernel at least.
- */
-static bool pm_fake(struct kvm_vcpu *vcpu,
-		    const struct sys_reg_params *p,
-		    const struct sys_reg_desc *r)
+static bool trap_raz_wi(struct kvm_vcpu *vcpu,
+			const struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
 {
 	if (p->is_write)
 		return ignore_write(vcpu, p);
@@ -199,6 +190,17 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 /*
  * Architected system registers.
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
+ *
+ * We could trap ID_DFR0 and tell the guest we don't support performance
+ * monitoring.  Unfortunately the patch to make the kernel check ID_DFR0 was
+ * NAKed, so it will read the PMCR anyway.
+ *
+ * Therefore we tell the guest we have 0 counters.  Unfortunately, we
+ * must always support PMCCNTR (the cycle counter): we just RAZ/WI for
+ * all PM registers, which doesn't crash the guest kernel at least.
+ *
+ * Same goes for the whole debug infrastructure, which probably breaks
+ * some guest functionnality. This should be fixed.
  */
 static const struct sys_reg_desc sys_reg_descs[] = {
 	/* DC ISW */
@@ -258,10 +260,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	/* PMINTENSET_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMINTENCLR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
-	  pm_fake },
+	  trap_raz_wi },
 
 	/* MAIR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
@@ -290,43 +292,43 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	/* PMCR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMCNTENSET_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMCNTENCLR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b010),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMOVSCLR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b011),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMSWINC_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b100),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMSELR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b101),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMCEID0_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b110),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMCEID1_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b111),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMCCNTR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b000),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMXEVTYPER_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b001),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMXEVCNTR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b010),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMUSERENR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b000),
-	  pm_fake },
+	  trap_raz_wi },
 	/* PMOVSSET_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b011),
-	  pm_fake },
+	  trap_raz_wi },
 
 	/* TPIDR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
@@ -372,19 +374,20 @@ static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn( 7), CRm(10), Op2( 2), access_dcsw },
 	{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
 
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 5), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 6), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 7), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(13), Op2( 0), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(13), Op2( 1), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(13), Op2( 2), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(14), Op2( 0), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(14), Op2( 1), pm_fake },
-	{ Op1( 0), CRn( 9), CRm(14), Op2( 2), pm_fake },
+	/* PMU */
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 5), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 6), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 7), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(13), Op2( 0), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(13), Op2( 1), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(13), Op2( 2), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 0), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 1), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 2), trap_raz_wi },
 
 	{ Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, c10_PRRR },
 	{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
-- 
2.0.0




More information about the linux-arm-kernel mailing list