[PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow

[Andreas Färber]

Am 02.08.2014 14:56, schrieb Tomasz Figa:
> On 02.08.2014 14:21, Tomasz Figa wrote:
>> On 02.08.2014 02:52, Andreas Färber wrote:
>>> Use the new style of referencing inherited nodes and use symbolic names.
>>> Reorder one pinctrl node in GPIO order.
>>>
>>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>>
>>> Suggested-by: Doug Anderson <dianders at chromium.org>
>>> Reviewed-by: Doug Anderson <dianders at chromium.org>
>>> Signed-off-by: Andreas Färber <afaerber at suse.de>
>>> ---
>>>  v5 -> v6:
>>>  * Split off label additions (Doug Anderson)
>>>  * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>>  
>>>  v4 -> v5:
>>>  * Introduced labels to consistently use new referencing style (Tomasz Figa)
>>>  * Use IRQ_TYPE_* constants
>>>  * Use some more GPIO_ACTIVE_*
>>>
>>>  v3 -> v4: Unchanged
>>>  
>>>  v3: New (Doug Anderson)
>>>
>>>  arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>>>  1 file changed, 145 insertions(+), 146 deletions(-)
>>
>> Reviewed-by: Tomasz Figa <t.figa at samsung.com>
> 
> Just for convenience of other reviewers, here are actual changes done do
> the device tree after compiling into dtb and then back into dts:

Erm, to not confuse reviewers, this must be over the whole series:

>> --- exynos5250-snow.dtb.dts	2014-08-02 14:54:15.145905921 +0200
>> +++ ../dtbs.post/exynos5250-snow.dtb.dts	2014-08-02 14:54:15.146905921 +0200
>> @@ -8,6 +8,7 @@
>>  	model = "Google Snow";
>>  
>>  	chosen {
>> +		bootargs = "console=tty1";
>>  	};
>>  
>>  	aliases {

This is optional follow-on patch 05/10.

>> @@ -829,15 +830,6 @@
>>  			phandle = <0x44>;
>>  		};
>>  
>> -		hdmi-hpd-irq {
>> -			samsung,pins = "gpx3-7";
>> -			samsung,pin-function = <0x0>;
>> -			samsung,pin-pud = <0x1>;
>> -			samsung,pin-drv = <0x0>;
>> -			linux,phandle = <0x33>;
>> -			phandle = <0x33>;
>> -		};
>> -
>>  		max77686-irq {
>>  			samsung,pins = "gpx3-2";
>>  			samsung,pin-function = <0x0>;
>> @@ -846,6 +838,15 @@
>>  			linux,phandle = <0xe>;
>>  			phandle = <0xe>;
>>  		};
>> +
>> +		hdmi-hpd-irq {
>> +			samsung,pins = "gpx3-7";
>> +			samsung,pin-function = <0x0>;
>> +			samsung,pin-pud = <0x1>;
>> +			samsung,pin-drv = <0x0>;
>> +			linux,phandle = <0x33>;
>> +			phandle = <0x33>;
>> +		};
>>  	};
>>  
>>  	pinctrl at 13400000 {

This is this patch 04/10. Just a movement.

>> @@ -1703,12 +1704,12 @@
>>  		samsung,dw-mshc-ciu-div = <0x3>;
>>  		samsung,dw-mshc-sdr-timing = <0x2 0x3>;
>>  		samsung,dw-mshc-ddr-timing = <0x1 0x2>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <0x27 0x28 0x29>;
>>  
>>  		slot at 0 {
>>  			reg = <0x0>;
>>  			bus-width = <0x4>;
>> -			pinctrl-names = "default";
>> -			pinctrl-0 = <0x27 0x28 0x29>;
>>  		};
>>  	};
>>  

This is preceding patch 01/10.

Regards,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg