[PATCH 0/6] PCI: imx6: Random fixes
Bjorn Helgaas
bhelgaas at google.com
Thu Oct 31 13:36:23 EDT 2013
On Wed, Oct 30, 2013 at 8:52 AM, Marek Vasut <marex at denx.de> wrote:
> Dear Bjorn Helgaas,
>
>> On Tue, Oct 15, 2013 at 10:06 AM, Marek Vasut <marex at denx.de> wrote:
>> > Set of random fixes for the PCIe driver for i.MX6 . With these fixes, my
>> > setup with MX6Q -> PCIe bridge -> i210 ethernet adapter works as
>> > expected.
>> >
>> > NOTE: I'm sure this will start some discussion. There are quite a few
>> > patches
>> >
>> > that are more of a hacks. Shawn, I didn't ignore your remark about
>> > the clock patches, I will test it ASAP, I just want to have these
>> > fixes in the public so others can comment/test.
>> >
>> > Marek Vasut (6):
>> > PCI: imx6: Make reset-gpio optional
>> > PCI: imx6: Fix the clock for PCIe
>> > ARM: dts: imx6qdl: Fix the clock for PCIe
>> > PCI: imx6: Probe the PCIe in fs_initcall()
>> > PCI: imx6: Force Gen1 operation
>> > PCI: designware: Fix DT resource retrieval
>> >
>> > .../devicetree/bindings/pci/designware-pcie.txt | 2 +-
>> > arch/arm/boot/dts/imx6qdl.dtsi | 4 +-
>> > drivers/pci/host/pci-imx6.c | 63
>> > ++++++++++++++++------ drivers/pci/host/pcie-designware.c
>> > | 17 +++---
>> > 4 files changed, 55 insertions(+), 31 deletions(-)
>>
>> I'm ignoring this series for now. I assume you'll post an updated
>> series as mentioned in your Oct 17 response to "[Patch 5/6] PCI: imx6:
>> Force Gen1 operation." Please mark that series as "v2" when you post
>> it. My assumption is still that Shawn Guo will ack the
>> drivers/pci/host/ pieces before I apply them [1].
>
> Can you maybe pick at least these two:
>
> PCI: imx6: Make reset-gpio optional
> PCI: imx6: Probe the PCIe in fs_initcall()
Applied "Probe the PCIe in fs_initcall()" with Shawn's ack to my
pci/host-imx6 branch for v3.13, thanks.
Bjorn
More information about the linux-arm-kernel
mailing list