[PATCH 5/5] mmc: sdhci-esdhc-imx: add runtime pm support
Ulf Hansson
ulf.hansson at linaro.org
Wed Oct 30 18:49:19 EDT 2013
On 30 October 2013 15:12, Dong Aisheng <b29396 at freescale.com> wrote:
> The root clock will be disabled in runtime pm which can be used to save power.
>
> Signed-off-by: Dong Aisheng <b29396 at freescale.com>
> ---
> drivers/mmc/host/sdhci-esdhc-imx.c | 53 ++++++++++++++++++++++++++++++++++-
> 1 files changed, 51 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index da8026b..60201fd 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -27,6 +27,7 @@
> #include <linux/of_gpio.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_data/mmc-esdhc-imx.h>
> +#include <linux/pm_runtime.h>
> #include "sdhci-pltfm.h"
> #include "sdhci-esdhc.h"
>
> @@ -1117,9 +1118,17 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
> host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
> }
>
Add:
pm_runtime_set_active
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_suspend_ignore_children(&pdev->dev, 1);
> +
> err = sdhci_add_host(host);
> - if (err)
> + if (err) {
> + pm_runtime_forbid(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> goto disable_clk;
> + }
>
> return 0;
>
> @@ -1141,6 +1150,9 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
>
> sdhci_remove_host(host, dead);
>
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> clk_disable_unprepare(imx_data->clk_per);
> clk_disable_unprepare(imx_data->clk_ipg);
> clk_disable_unprepare(imx_data->clk_ahb);
> @@ -1150,12 +1162,49 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM_RUNTIME
> +static int sdhci_esdhc_runtime_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct pltfm_imx_data *imx_data = pltfm_host->priv;
> + int ret;
> +
> + ret = sdhci_runtime_suspend_host(host);
> +
> + clk_disable_unprepare(imx_data->clk_per);
> + clk_disable_unprepare(imx_data->clk_ipg);
> + clk_disable_unprepare(imx_data->clk_ahb);
> +
> + return ret;
> +}
> +
> +static int sdhci_esdhc_runtime_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct pltfm_imx_data *imx_data = pltfm_host->priv;
> +
> + clk_prepare_enable(imx_data->clk_per);
> + clk_prepare_enable(imx_data->clk_ipg);
> + clk_prepare_enable(imx_data->clk_ahb);
> +
> + return sdhci_runtime_resume_host(host);
> +}
> +#endif
> +
> +static const struct dev_pm_ops sdhci_esdhc_pmops = {
> + SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
> + SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
> + sdhci_esdhc_runtime_resume, NULL)
> +};
> +
> static struct platform_driver sdhci_esdhc_imx_driver = {
> .driver = {
> .name = "sdhci-esdhc-imx",
> .owner = THIS_MODULE,
> .of_match_table = imx_esdhc_dt_ids,
> - .pm = SDHCI_PLTFM_PMOPS,
> + .pm = &sdhci_esdhc_pmops,
> },
> .id_table = imx_esdhc_devtype,
> .probe = sdhci_esdhc_imx_probe,
> --
> 1.7.2.rc3
Apart from the minor issue in the probe function, looks good to me.
Kind regards
Ulf Hansson
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list