[PATCH V2 4/7] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs
Sricharan R
r.sricharan at ti.com
Wed Oct 30 10:57:17 EDT 2013
Now with the crossbar IP in picture, the peripherals do not have the
fixed interrupt lines. Instead they rely on the crossbar irqchip to
allocate and map a free interrupt line to its crossbar input. So replacing
all the peripheral interrupt numbers with its fixed crossbar input lines.
Cc: Benoit Cousson <bcousson at baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
Cc: Rajendra Nayak <rnayak at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
Signed-off-by: Sricharan R <r.sricharan at ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 93 +++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 008396f..afb89f1 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -136,10 +136,10 @@
sdma: dma-controller at 4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
- interrupts = <0 12 0x4>,
- <0 13 0x4>,
- <0 14 0x4>,
- <0 15 0x4>;
+ interrupts = <0 7 0x4>,
+ <0 8 0x4>,
+ <0 9 0x4>,
+ <0 10 0x4>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
@@ -150,7 +150,7 @@
gpio1: gpio at 4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
- interrupts = <0 29 0x4>;
+ interrupts = <0 24 0x4>;
ti,hwmods = "gpio1";
clocks = <&wkupaon_iclk_mux>, <&gpio1_dbclk>;
clock-names = "fck", "dbclk";
@@ -163,7 +163,7 @@
gpio2: gpio at 48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
- interrupts = <0 30 0x4>;
+ interrupts = <0 25 0x4>;
ti,hwmods = "gpio2";
clocks = <&l3_iclk_div>, <&gpio2_dbclk>;
clock-names = "fck", "dbclk";
@@ -176,7 +176,7 @@
gpio3: gpio at 48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
- interrupts = <0 31 0x4>;
+ interrupts = <0 26 0x4>;
ti,hwmods = "gpio3";
clocks = <&l3_iclk_div>, <&gpio3_dbclk>;
clock-names = "fck", "dbclk";
@@ -189,7 +189,7 @@
gpio4: gpio at 48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 27 0x4>;
ti,hwmods = "gpio4";
clocks = <&l3_iclk_div>, <&gpio4_dbclk>;
clock-names = "fck", "dbclk";
@@ -202,7 +202,7 @@
gpio5: gpio at 4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
- interrupts = <0 33 0x4>;
+ interrupts = <0 28 0x4>;
ti,hwmods = "gpio5";
clocks = <&l3_iclk_div>, <&gpio5_dbclk>;
clock-names = "fck", "dbclk";
@@ -215,7 +215,7 @@
gpio6: gpio at 4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
- interrupts = <0 34 0x4>;
+ interrupts = <0 29 0x4>;
ti,hwmods = "gpio6";
clocks = <&l3_iclk_div>, <&gpio6_dbclk>;
clock-names = "fck", "dbclk";
@@ -228,7 +228,7 @@
gpio7: gpio at 48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
- interrupts = <0 35 0x4>;
+ interrupts = <0 30 0x4>;
ti,hwmods = "gpio7";
clocks = <&l3_iclk_div>, <&gpio7_dbclk>;
clock-names = "fck", "dbclk";
@@ -241,7 +241,7 @@
gpio8: gpio at 48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
- interrupts = <0 121 0x4>;
+ interrupts = <0 116 0x4>;
ti,hwmods = "gpio8";
clocks = <&l3_iclk_div>, <&gpio8_dbclk>;
clock-names = "fck", "dbclk";
@@ -254,7 +254,7 @@
uart1: serial at 4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <0 72 0x4>;
+ interrupts = <0 67 0x4>;
ti,hwmods = "uart1";
clocks = <&uart1_gfclk_mux>;
clock-names = "fck";
@@ -265,7 +265,7 @@
uart2: serial at 4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <0 73 0x4>;
+ interrupts = <0 68 0x4>;
ti,hwmods = "uart2";
clocks = <&uart2_gfclk_mux>;
clock-names = "fck";
@@ -276,7 +276,7 @@
uart3: serial at 48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <0 74 0x4>;
+ interrupts = <0 69 0x4>;
ti,hwmods = "uart3";
clocks = <&uart3_gfclk_mux>;
clock-names = "fck";
@@ -287,7 +287,7 @@
uart4: serial at 4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <0 70 0x4>;
+ interrupts = <0 65 0x4>;
ti,hwmods = "uart4";
clocks = <&uart4_gfclk_mux>;
clock-names = "fck";
@@ -298,7 +298,7 @@
uart5: serial at 48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <0 105 0x4>;
+ interrupts = <0 100 0x4>;
ti,hwmods = "uart5";
clocks = <&uart5_gfclk_mux>;
clock-names = "fck";
@@ -309,7 +309,7 @@
uart6: serial at 48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <0 106 0x4>;
+ interrupts = <0 101 0x4>;
ti,hwmods = "uart6";
clocks = <&uart6_gfclk_mux>;
clock-names = "fck";
@@ -352,7 +352,7 @@
timer1: timer at 4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
- interrupts = <0 37 0x4>;
+ interrupts = <0 32 0x4>;
ti,hwmods = "timer1";
clocks = <&timer1_gfclk_mux>;
clock-names = "fck";
@@ -362,7 +362,7 @@
timer2: timer at 48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
- interrupts = <0 38 0x4>;
+ interrupts = <0 33 0x4>;
ti,hwmods = "timer2";
clocks = <&timer2_gfclk_mux>;
clock-names = "fck";
@@ -371,7 +371,7 @@
timer3: timer at 48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
- interrupts = <0 39 0x4>;
+ interrupts = <0 34 0x4>;
ti,hwmods = "timer3";
clocks = <&timer3_gfclk_mux>;
clock-names = "fck";
@@ -380,7 +380,7 @@
timer4: timer at 48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
- interrupts = <0 40 0x4>;
+ interrupts = <0 35 0x4>;
ti,hwmods = "timer4";
clocks = <&timer4_gfclk_mux>;
clock-names = "fck";
@@ -389,7 +389,7 @@
timer5: timer at 48820000 {
compatible = "ti,omap5430-timer";
reg = <0x48820000 0x80>;
- interrupts = <0 41 0x4>;
+ interrupts = <0 36 0x4>;
ti,hwmods = "timer5";
clocks = <&timer5_gfclk_mux>;
clock-names = "fck";
@@ -399,7 +399,7 @@
timer6: timer at 48822000 {
compatible = "ti,omap5430-timer";
reg = <0x48822000 0x80>;
- interrupts = <0 42 0x4>;
+ interrupts = <0 37 0x4>;
ti,hwmods = "timer6";
clocks = <&timer6_gfclk_mux>;
clock-names = "fck";
@@ -410,7 +410,7 @@
timer7: timer at 48824000 {
compatible = "ti,omap5430-timer";
reg = <0x48824000 0x80>;
- interrupts = <0 43 0x4>;
+ interrupts = <0 38 0x4>;
ti,hwmods = "timer7";
clocks = <&timer7_gfclk_mux>;
clock-names = "fck";
@@ -420,7 +420,7 @@
timer8: timer at 48826000 {
compatible = "ti,omap5430-timer";
reg = <0x48826000 0x80>;
- interrupts = <0 44 0x4>;
+ interrupts = <0 39 0x4>;
ti,hwmods = "timer8";
clocks = <&timer8_gfclk_mux>;
clock-names = "fck";
@@ -431,7 +431,7 @@
timer9: timer at 4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
- interrupts = <0 45 0x4>;
+ interrupts = <0 40 0x4>;
ti,hwmods = "timer9";
clocks = <&timer9_gfclk_mux>;
clock-names = "fck";
@@ -440,7 +440,7 @@
timer10: timer at 48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
- interrupts = <0 46 0x4>;
+ interrupts = <0 41 0x4>;
ti,hwmods = "timer10";
clocks = <&timer10_gfclk_mux>;
clock-names = "fck";
@@ -449,7 +449,7 @@
timer11: timer at 48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
- interrupts = <0 47 0x4>;
+ interrupts = <0 42 0x4>;
ti,hwmods = "timer11";
clocks = <&timer11_gfclk_mux>;
clock-names = "fck";
@@ -487,16 +487,23 @@
wdt2: wdt at 4ae14000 {
compatible = "ti,omap4-wdt";
reg = <0x4ae14000 0x80>;
- interrupts = <0 80 0x4>;
+ interrupts = <0 75 0x4>;
ti,hwmods = "wd_timer2";
clocks = <&sys_32k_ck>;
clock-names = "fck";
};
+ dmm: dmm at 4e000000 {
+ compatible = "ti,omap5-dmm";
+ reg = <0x4e000000 0x800>;
+ interrupts = <0 108 0x4>;
+ ti,hwmods = "dmm";
+ };
+
i2c1: i2c at 48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
- interrupts = <0 56 0x4>;
+ interrupts = <0 51 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -508,7 +515,7 @@
i2c2: i2c at 48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
- interrupts = <0 57 0x4>;
+ interrupts = <0 52 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -520,7 +527,7 @@
i2c3: i2c at 48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
- interrupts = <0 61 0x4>;
+ interrupts = <0 56 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -532,7 +539,7 @@
i2c4: i2c at 4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
- interrupts = <0 62 0x4>;
+ interrupts = <0 57 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -544,7 +551,7 @@
i2c5: i2c at 4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
- interrupts = <0 60 0x4>;
+ interrupts = <0 55 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
@@ -556,7 +563,7 @@
mmc1: mmc at 4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
- interrupts = <0 83 0x4>;
+ interrupts = <0 78 0x4>;
ti,hwmods = "mmc1";
clocks = <&mmc1_fclk_div>, <&mmc1_clk32k>;
clock-names = "fck", "clk32k";
@@ -570,7 +577,7 @@
mmc2: mmc at 480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
- interrupts = <0 86 0x4>;
+ interrupts = <0 81 0x4>;
ti,hwmods = "mmc2";
clocks = <&mmc2_fclk_div>, <&mmc2_clk32k>;
clock-names = "fck", "clk32k";
@@ -583,7 +590,7 @@
mmc3: mmc at 480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
- interrupts = <0 94 0x4>;
+ interrupts = <0 89 0x4>;
ti,hwmods = "mmc3";
clocks = <&mmc3_gfclk_div>, <&mmc3_clk32k>;
clock-names = "fck", "clk32k";
@@ -596,7 +603,7 @@
mmc4: mmc at 480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
- interrupts = <0 96 0x4>;
+ interrupts = <0 91 0x4>;
ti,hwmods = "mmc4";
clocks = <&mmc4_gfclk_div>, <&mmc4_clk32k>;
clock-names = "fck", "clk32k";
@@ -609,7 +616,7 @@
mcspi1: spi at 48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
- interrupts = <0 65 0x4>;
+ interrupts = <0 60 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -632,7 +639,7 @@
mcspi2: spi at 4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
- interrupts = <0 66 0x4>;
+ interrupts = <0 61 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -650,7 +657,7 @@
mcspi3: spi at 480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
- interrupts = <0 91 0x4>;
+ interrupts = <0 86 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -665,7 +672,7 @@
mcspi4: spi at 480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
- interrupts = <0 48 0x4>;
+ interrupts = <0 43 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
--
1.7.9.5
More information about the linux-arm-kernel
mailing list