[PATCH 01/12] clocksource: sh_cmt: Add clk_prepare/unprepare support
Simon Horman
horms at verge.net.au
Tue Oct 29 01:55:35 EDT 2013
On Mon, Oct 28, 2013 at 11:49:18PM +0100, Laurent Pinchart wrote:
> Prepare the clock at probe time, as there is no other appropriate place
> in the driver where we're allowed to sleep.
>
> Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
> Cc: linux-kernel at vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Thanks Laurent,
I have queued this up in the clocksources branch of my renesas tree.
I will send a pull request to Mike once v3.13-rc1 has hit the shelves.
Mike, please let me know if you would prefer something earlier than that.
> ---
> drivers/clocksource/sh_cmt.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
> index 0965e98..940341a 100644
> --- a/drivers/clocksource/sh_cmt.c
> +++ b/drivers/clocksource/sh_cmt.c
> @@ -634,12 +634,18 @@ static int sh_cmt_clock_event_next(unsigned long delta,
>
> static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
> {
> - pm_genpd_syscore_poweroff(&ced_to_sh_cmt(ced)->pdev->dev);
> + struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
> +
> + pm_genpd_syscore_poweroff(&p->pdev->dev);
> + clk_unprepare(p->clk);
> }
>
> static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
> {
> - pm_genpd_syscore_poweron(&ced_to_sh_cmt(ced)->pdev->dev);
> + struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
> +
> + clk_prepare(p->clk);
> + pm_genpd_syscore_poweron(&p->pdev->dev);
> }
>
> static void sh_cmt_register_clockevent(struct sh_cmt_priv *p,
> @@ -737,6 +743,10 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
> goto err2;
> }
>
> + ret = clk_prepare(p->clk);
> + if (ret < 0)
> + goto err3;
> +
> if (res2 && (resource_size(res2) == 4)) {
> /* assume both CMSTR and CMCSR to be 32-bit */
> p->read_control = sh_cmt_read32;
> @@ -773,19 +783,21 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
> cfg->clocksource_rating);
> if (ret) {
> dev_err(&p->pdev->dev, "registration failed\n");
> - goto err3;
> + goto err4;
> }
> p->cs_enabled = false;
>
> ret = setup_irq(irq, &p->irqaction);
> if (ret) {
> dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> - goto err3;
> + goto err4;
> }
>
> platform_set_drvdata(pdev, p);
>
> return 0;
> +err4:
> + clk_unprepare(p->clk);
> err3:
> clk_put(p->clk);
> err2:
> --
> 1.8.1.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list